Why does my new ink cartridge says empty?
This error message is usually the result of a cartridge that is not firmly seated in its designated slot. If a new cartridge is installed before the printer driver resets, there is a chance that the printer may think that the old empty cartridge is still being used.
Why is my HP printer saying its out of ink?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
How do I get rid of HP printer ink error?
To override HP ink cartridge error, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Gently, with a dry lint-free cloth, wipe the contacts on the cartridge and carriage to remove any dirt or residue.
Why does my printer say cyan toner is low / empty?
If the operator panel language is Spanish, it may be the black toner cartridge, and not the cyan toner cartridge, that is low/empty. The replacement cyan toner cartridge may be a used or defective cartridge. The printer may need to be reset. A part on the printer may be malfunctioning.
Why does my printer say the ink cartridge is empty?
If it still gives the error message, you may have another cartridge that needs attention. Even if you only need to use black ink for a print job, many printers insist that all cartridges have some ink. Also, make sure the contacts on the ink cartridge and printer are clean.
What to do if your ink cartridge is low?
Check the ink level on your printer and replace low, empty or faulty ink cartridges on the printer. Try updating the printer firmware to the latest version and check if it helps. Update the printer firmware using this link. Click Here Resetting the printer can reset the connection with the ink cartridge and clear any error messages.
What to do if your printer says yellow cartridge?
09-09-2018 08:54 AM The same thing happened to me only with the yellow cartridge. I was able to fix this problem by first turning off the printer. Then, holding down the left and right arrows, turn on the printer. Keep holding the arrows down for about 15 seconds.