How do you remove a locking nut from a sink?
Cut the nut off with a hacksaw. Cut diagonally through the soft metal or the plastic of the locknut. Pull it off once the edge has been breached. Alternatively, if you are not going to use the drain basket again, place the hacksaw blade between the locknut and the sink proper and saw through the drain basket.
How do you remove a stubborn bathroom faucet?
If it’s stuck, wrap a rag around it, give it a few light taps with a hammer and try again. Squirt a few drops of penetrating oil or spray lubricant into the space between the handle and the valve stem. Wait a few minutes, then tap the handle and try pulling it off. Place a scrap piece of wood on the faucet body.
Why is my bathroom tap stiff?
Stiffness in a faucet involves the rubber seals wearing out. Over time, the handles on your sink, bathtub or shower faucet may become stiff, making them hard or even next to impossible to turn. Oftentimes, the problem relates to worn faucet seals. If this is the case, you just need to replace the faucet seals.
How do you loosen tight plastic bolts?
Whether you use a basin wrench or a hammer and screwdriver, the nut is easier to loosen if you heat it with a hairdryer. The heat should soften the plastic and make the nut pliable enough to break free. It also helps to spray some calcium dissolver on the nut and wait several minutes before tapping or twisting.
How do you lubricate a stiff tap?
If your bathroom or kitchen sink faucet is hard to move or squeaky, you can fix the annoying problem with a bit of silicone-based faucet lubricant. The inexpensive lubricant is food-grade safe and designed specifically for use on faucets and the parts inside them.
Can you use WD40 on bathroom taps?
If you have hard water, descale the tap and spray on a little WD40. Turn the water off by closing the hot and cold valves under the sink. If you can’t find the valves, shut off the main water supply instead. Turn on the tap to release any remaining water.
How do you get plastic nut off toilet handle?
Look for the plastic nut in the bottom of the toilet tank. Use a hex wrench, adjustable wrench, or pliers to clamp onto the nut. Carefully turn the nut until it comes loose and pull it out of the tank….
- Turn off Water.
- Drain the Tank.
- Plunger.
- Bail Water.
- Wet/Dry Vac.
- Siphon.
- Disconnect the Supply Hose.
- Remove Plastic Nut.