Why does my abs light come on when I Change my tire?
,”These tires have a stronger side wall construction to the tire, but this creates more road noise when driving, so he replaced the tires with a different, more commonly fitted set of aftermarket performance tires. In doing this it caused the ABS/TPS light to come on, this only happened when he changed tire brands.
Why is my ABS sensor blue and brown?
So started chasing the wiring back to the ABS unit where I found the blue and brown cables from the offending sensor along with the rest of the loom so tight against the bottom of the ABS unit that it had shorted 1 of the cables with 10 years of wear to the base of the ABS control unit.
Why does the ABS light come on on my Mini Cooper?
Re insulated the loom with some large heat shrink to fit over loom plug and then the cables and all is good once again. Hope this helps someone. So, I read your issue with the ABS/TPS light coming on, I’m about to purchase a 2003 Mini with 32000 original miles from a friend who bought the car NEW in 2003.
What does it mean when your abs is not working?
This helps improve performance and also puts less pressure on the system. ABS problems occur when a sensor, wiring, valve or the hydraulic system malfunctions. It can affect the entire operation. When this happens, the ABS light under the dashboard illuminates indicating that a problem has occurred and the system will not work properly.
What causes an ABS light to come on?
ABS problems occur when a sensor, wiring, valve or the hydraulic system malfunctions. It can affect the entire operation. When this happens, the ABS light under the dashboard illuminates indicating that a problem has occurred and the system will not work properly.
What’s the best way to cycle the ABS?
The factory-approved method is to use the Tech 1 Scan Tool to command the computer to cycle the ABS. But the “shade-tree” mechanic method is to drive down a gravel- or snow-covered road and jump on the brakes, which will cause the wheels to lock up and… cycle the ABS.
How to troubleshoot Chevy Silverado ABS system problems?
Remove the fuse for the ABS system with a fuse puller located in the fuse box cover. Check the fuse to make sure that it is not blown. If it is, you’ll need to replace it with another fuse of the same amperage. Look behind each wheel of the Silverado. On the back of the wheel hub are the wires for the ABS system.