How do you mount a wheel angle sensor?
1. Mount the wheel angle sensor and linkages as shown above 2. Connect the cable to the sensor (see cable identification figure in this manual) 3. Adjust the arm & rod lengths to obtain between 3400 and 3800 counts from the wheel angle sensor during steering calibration procedure 3.
What to do if ABS wheel speed sensor goes out?
If the ABS wheel speed sensor was faulty, once the new hub/sensor is installed, and you drive the vehicle, the warning lights should go out. To determine what is going on, you can manually erase the trouble codes using an appropriate scan tool and if the warning lights stay off, then the problem is resolved.
How does a wheel speed sensor work in a car?
Even some vehicles without anti-lock brake systems (ABS) will use wheel speed sensors as the vehicle speed input for the engine control module and transmission control module. The traditional wheel speed sensor consists of a tone wheel (sometimes called a trigger wheel) plus a magnetic pickup.
Where is the ABS sensor on my car?
For example, if you’re working on the passenger side, turn the wheel all the way toward the driver’s side. This will give you easier access to the ABS parts, both visually and in terms of your reach. Locate the ABS wheel sensor. Remove the bolts that attach it to the rest of the suspension.
Where is the sensor located on a wheel?
This is a typical reading from a wheel sensor. Configuration of the sensor mounting is different for each manufacturer but follow the same operation. In the image below a stator ring or as it is sometimes called a reluctor can be located inside the bearing hub, rear axle housing, or on the CV joint itself.
What are the signs of a bad ABS wheel speed sensor?
Signs of a Bad ABS Wheel Speed Sensor. By Mia Bevacqua. May 24, 2018. These are the most common problems associated with a faulty ABS speed sensor: Warning lights appear on the dashboard: If the ABS computer finds a problem with a wheel speed sensor or its circuit, it will trigger the ABS warning light on the dash.
Where is the speed sensor on a truck?
ABS speed sensors are most commonly mounted at the wheels on most modern vehicles. This is the most efficient spot to mount them. Some older vehicles, trucks with solid axles in particular, will have them mounted on the rear differential.