When to replace compressor clutch on Honda Civic EX 4?
Tommrow I am going to replace my compressor clutch on my 2007 honda civic ex 4 door and I wanted to know if anyone have a diagram anything to follow so it can be easier. Anything I should expect before I do so?
How do you replace a clutch on a Honda Civic?
1. jack up car using a jack and jack stands. 3. remove clips that hold splash shield in place and pull out of the way. 5.take a 10 or 12mm socket and remove the center nut on compressor pulley. slide out clutch and be sure not to lose the spacers.
What kind of oil to put in Honda Civic clutch?
-You need 2.5OZ PAG 46 Oil with yellow dye and 15 OZ R-134A. – (skip this step if new compressor comes with oil) drain the oil out of the new AC compressor, and pour 2.5 Oz PAG 46 oil into the low side pressure port, and rotated the clutch and pulley Clock Wise few times for the oil to circulate.
How do you replace the flywheel on a Honda Civic?
Use the following steps to replace the flywheel and clutch on your Honda Civic. The quickest way to reach the clutch is from underneath the chassis. In order to do this, use a jack to raise the vehicle and a pair of jack stands to support the chassis in the air. Also use this as an opportunity to drain the transmission fluid. Figure 1.
How do you replace a compressor clutch on a Honda Civic?
5.take a 10 or 12mm socket and remove the center nut on compressor pulley. slide out clutch and be sure not to lose the spacers. 11. put pulley back on it might take gental taps to get on but it will go. reinstall snap ring for pulley.
What kind of clutch does a Honda Civic have?
This article breaks down a complicated process and takes you step-by-step in how to correctly replace the flywheel and clutch on your Honda Civic. This article applies to the Honda Civic (1992-2000). Your Honda Civic uses a hydraulic clutch system to engage the transmission into the gears.
How long does it take to replace clutch on civic?
I can do this particular car in around 3-4 hours if I don’t get distracted. Realistically, you should give yourself 8-10 hours of actual work time plus whatever you spend fixing as you go. There are probably several different ways to approach this kind of work depending on the equipment available to you.
Use the following steps to replace the flywheel and clutch on your Honda Civic. The quickest way to reach the clutch is from underneath the chassis. In order to do this, use a jack to raise the vehicle and a pair of jack stands to support the chassis in the air. Also use this as an opportunity to drain the transmission fluid. Figure 1.