How do you bypass a motorcycle starter switch?

How do you bypass a motorcycle starter switch?

How do you bypass a motorcycle starter?

1. Locate the starter motor under the vehicle.
2. Locate the two metal contacts on the back of the starter solenoid.
3. Place the metal blade of an insulated screwdriver across both metal contacts.
4. Get a friend to help you by turning on the ignition with the key.

What happens if you hit the starter button and nothing happens?

Battery good, lights , horn turn signal works. Fuel pump runs , hit starter and nothing, lights do not dim and no sound at all. All fuses O.K. starter relay maybe ? any advice ? 06 roadking by the way.

What happens when you push the start button on a Harley Davidson?

There’s a connector plugged into the top of the starter, green wire. Unplug the connector and probe it for B+ while pushing the start button. If it shows volts the start button is good. Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over).

Why do I not hear the start button when I push it?

If you don’t hear the solenoid click when you press the start button and you have a fully charged battery, it’s either the start relay, the solenoid or a bad wire. Put a fresh battery in the key fob, make a habit of changing it once a year.

What should I do if I push the start button?

Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over). If both those tests pass the battery and start button are okay. Check the ignition switch and harness connector under the dash.

If you don’t hear the solenoid click when you press the start button and you have a fully charged battery, it’s either the start relay, the solenoid or a bad wire. Put a fresh battery in the key fob, make a habit of changing it once a year.

There’s a connector plugged into the top of the starter, green wire. Unplug the connector and probe it for B+ while pushing the start button. If it shows volts the start button is good. Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over).

Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over). If both those tests pass the battery and start button are okay. Check the ignition switch and harness connector under the dash.

How can I tell if my car starter is working?

Unplug the connector and probe it for B+ while pushing the start button. If it shows volts the start button is good. Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over). If both those tests pass the battery and start button are okay.