What is the 24 pin power connector used for?
A 24-pin power supply adds an extra line each of 3.3 volts, 5 volts, and 12 volts, as well as an additional ground. These extra lines are used to satisfy the needs of newer technologies and more power-hungry peripherals. They also replace older 12 volt auxiliary connectors found on some 20-pin motherboards.
What is 24 pin motherboard adapter?
The ATX 24 Pin 90° Adapter makes it so that the main power cable can be installed to the motherboard at a 90° angle, removing the need to wrap, bend, or fold the cable back over the motherboard.
What is a 24 pin ATX power connector?
The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.
What is the use of ATX power supply?
ATX power supplies are turned on and off by a signal from the motherboard. They also provide a signal to the motherboard to indicate when the DC voltages are in spec, so that the computer is able to safely power up and boot. The most recent ATX PSU standard is version 2.31 as of mid-2008.
What is ATX power?
ATX (Advanced Technology eXtended) is a motherboard and power supply configuration specification developed by Intel in 1995 to improve on previous de facto standards like the AT design. ATX is the most common motherboard design.
What is ATX power connection?
An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1. Note.
What is a 24 pin power connector?
A 24-pin power supply is a type of computer power supply using a 24-pin primary connector. Older power supplies came equipped with only a 20-pin primary connector. The extra four pins provide additional power to the computer’s motherboard, which in turn provides power to internal components.
What is an ATX style connector?
What is an ATX Style Connector? An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1.
What is ATX power supply?
An ATX power supply is typically controlled by an electronic switch. Instead of a hard switch at the main power input, the power button on an ATX system is a sensor input monitored by the computer. ATX systems allow the Operating System to control the final “off” signal to the power supply;