How to change the actuator on a Honda Pilot?
Gently open the white plastic sheet about a quarter of the way from the top right down so you can reach in the actuator area (near the door latch – at the end of door with 3 screws). Open the window guardrail, if its in the way – use a 3/8 bolt. 7. Use correct amount of force, without stripping them, open the 3 screws at the door latch. 8.
How to replace the door lock on a Honda Pilot?
1. Remove the plastic tab under the inner door latch. 2. Open the 2 small black colored screws. 3. Carefully swing the door latch attachment out by moving it down and out. Remove the rod and the electrical connection – there’s a slot to press and pull-out.
How does a Honda power door lock work?
Honda doesn’t get points for this design ; if you are good at Rubik’s Cubes , you’ll be OK. You won’t know it until after the whole assembly is out and in your hand, but the big, white L shape rattle guard that keeps the rod for the interior up/down pull tab from banging into things is removable once the outer door handle/lock is removed.
Why is my power door lock not working?
If yes, you probably just need to reattach a rod to the actuator. If no, then you might need a new actuator, but check the electrical connections first. There’s a how-to thread on getting the door apart; do a search for it. Click to expand… Unrelated problem, is my guess. You have changed the batteries in the remote, right?
Gently open the white plastic sheet about a quarter of the way from the top right down so you can reach in the actuator area (near the door latch – at the end of door with 3 screws). Open the window guardrail, if its in the way – use a 3/8 bolt. 7. Use correct amount of force, without stripping them, open the 3 screws at the door latch. 8.
1. Remove the plastic tab under the inner door latch. 2. Open the 2 small black colored screws. 3. Carefully swing the door latch attachment out by moving it down and out. Remove the rod and the electrical connection – there’s a slot to press and pull-out.
Why is one of the door lock actuators not working?
If your vehicle is equipped with an individual door lock controller of body control module, those units usually fail to lock/unlock all the door lock actuators, not just one. If only one door lock actuator isn’t working, chances are it’s not the control module (there are exceptions however).
Do you need to replace power Door Latch actuator?
If you don’t see the voltage toggle, work backwards to the switch to isolate the problem. The actual procedure depends on the year, make and model of your vehicle. Late model vehicles have the actuator built into the door latch assembly, forcing you to replace the entire latch.
How to replace rear door lock actuator in Honda Pilot?
Expect to set aside at least 1-2 hours on the first replacement, lesser time on the ones afterwards. Be careful not to push parts in directions that they shouldn’t be pushed in. Don’t break any plastic parts/metal rods or connections – take your time. 1. Remove the plastic tab under the inner door latch. 2. Open the 2 small black colored screws. 3.
Is the driver side lock on a Honda ex working?
The lock/unlock button and keyless entry works on all of the doors except the drivers on my 2004 EX. The driver side lock still works manually though. However, there was no complete description on how to remove and replace this part, so here’s my stab at it after spending the better part of 2 hours fixing mine.
How much does it cost to fix a Honda door lock?
Know what price you should pay to get your vehicle fixed. The average cost for a Honda Pilot door lock actuator replacement is between $177 and $240. Labor costs are estimated between $88 and $111 while parts are priced between $89 and $129. Estimate does not include taxes and fees.
What are the actuators on a car door?
Door lock actuators are most commonly electric motors that control a mechanical linkage operating the door locks. In some vehicles they used a system of vacuum motors, hoses and actuators to operate the lock mechanisms. No matter which system your vehicle has there will be a small computer that operates the actuators.