Is 1866 MHz RAM good?
A DDR3 1866 Mhz RAM operates at an 1866 MHz clock, and an 1866 MHz clock cycle takes only 0.525ns to perform, meaning it is just slightly faster than 1600, and it handles most tasks with ease, including gaming. Is it good enough for gaming? Overall, yes DDR3 1866 memory is enough for gaming.
Can 1600mhz RAM work on 1866?
Yes, a motherboard that supports RAM frequency of 1866 MHz will support memory modules with a frequency of 1600 MHz or lower. If you buy a 1600 MHz RAM, you will be saving some money and a very little amount of power while compromising on speed.
Why is my RAM set to 1333MHz?
1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it. It will not harm anything.
Can I use both together 1333 MHz and 1600 MHz RAM?
You can, both sticks will run at 1333MHz. As long as your motherboard supports more than 8gb of RAM, which most of them do.
What is the fastest DDR3 RAM?
G. Skill reclaims world’s fastest DDR3 memory title at 4.4GHz
- The regular speed of the RAM ‘YoungPro’ used was 3,000MHz.
- As mentioned above, the RAM used for this world record breaking memory overclock was G.
What does ddr4 2666 1333mhz mean?
DDR stands for double data rate. There are 2 data transfers per clock. Actual frequency 1333mhz means effective frequency 2666mhz. CPU-Z is showing you actual frequency. You can calculate effective frequency yourself.
Is mixing RAM speed bad?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
What happens if I install different frequency RAM?
You can’t add RAM of different sizes (frequencies/models/etc.) If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.