Can you pour resin into a wooden tray?
The first pour should just come to the top of the wood slices and cover as much as the moss as possible. Mix and pour resin to add to the tray. Mix the resin according to the package directions then pour over the top of the tray. Be sure to wear gloves when working with resin.
How thick should a resin tray be?
As long as you pour in 1/8″ layers, you can go as thick as you like. The reason we recommend this thickness is two-fold: first, it allows the bubbles to escape properly, and second, it avoids any excessive overheating of the resin. So for best results always pour in a 1/8″ layer, and you’re good to go!
How much epoxy resin do I need for a tray?
General rule for epoxy coverage For coating epoxies, one mixed gallon (half a gallon each of resin and hardener) will cover twelve square feet at a thickness of 1/8 of an inch. This may vary by brand though, so always check the manufacturers instructions to be sure.
What happens if you pour epoxy resin too thick?
If your epoxy pour is too thick, the reaction can create too much heat, resulting in a product that does not cure properly with cracks or excessive bubbles. The rule of thumb is if you can make an imprint with your fingernail in the epoxy you can pour again and the epoxy will chemically bond to the previous layer.
Why is my resin bendy after a week?
In most cases, the reason you have resin that bends is due to the fact that the resin needs more time to cure. If you attempt to curve or move the resin before that 24 hour mark, the resin will likely bend. For a full cure, we recommend waiting 3 – 5 days to ensure that the resin is 100% firm.
Is resin bad for the environment?
Does Resin Harm the Environment? Natural resin is harmless to the environment, but most synthetic resin products are not environmentally friendly. The natural one is exuded from trees, especially pines and firs and occurs as a result of injury to the bark from wind, fire, lightning, or other cause.