How does the power window on the passenger side work?
Therefore, the windows should go up and down without any input from the drivers side controls. When the window is lowered from the drivers side, power is sent through the switch on the passenger side door to lower the window. Since the window will not go down from from the passenger side, the place to check is there.
Why is my driver’s side window not working?
The driver’s side window motor may have gone out, or there should be a short or bad connection in the switch. You could try taking the door card off and inspecting the window switch connector. I’ve had luck in the past just unplugging and plugging it back in when my passenger window was working intermittently.
How is the window lowered from the drivers side?
When the window is lowered from the drivers side, power is sent through the switch on the passenger side door to lower the window. Since the window will not go down from from the passenger side, the place to check is there. The window motor only has two wires because power will flow through one wire to raise the window.
Why is my passenger side door not coming down?
I have replaced both drivers door master switch and the passenger side door switch and it still won’t come down with a switch, Is there a solenoid or other devise that could cause this problem and if so where is it ?? The problem may be in within the removal harness which plugs into switch itself. A prong bent or internal connection.
Why is my passenger window not working but the driver window is working?
When passenger windows don’t work, but the driver’s window does, chances are high that you’ve got a bad master switch in the driver’s door or a broken wire in the driver’s door hinge area. Second: Power window motors only have two wires.
Is the front passenger window raised or lowered?
The front passenger window can be raised, but not lowered, from the driver’s side. The button on either driver or passenger side is not fully AUTO. I have tried various suggested methods to reinitialize the passenger side, but to no effect. I have also disconnected and reconnected the battery, thinking it may automatically reinitialize.
What to do when your front passenger window is closed?
Continue pulling up the switch for approximately 1 second after the window is closed completely. If the front passenger’s window is equipped with the auto-up/down function, it is necessary to repeat the same initialization procedure on that window switch. Click to expand…
How do you open the front passenger window in a Subaru?
Anti-entrapment function (driver’s and front passenger’s windows) Initialize the power window in the following procedure to reactivate such functions. 1. Close the driver’s door. 2. Turn the ignition switch to the “ON” position. 3. Open the driver’s side window halfway by pushing down the power window switch.
Why is my front passenger window not working?
Front passenger window not working, not getting power to the switch either. The other three windows work great. Which color is the power for the passenger side? Where do I start? have the same problem?
Is there a problem with the passenger side window switch?
I have noticed a problem with my passenger side window switch. It will roll the window down, but it won’t roll the window back up. I can only roll the window back up using the switch on the driver’s side. In the past, I have taken the trim off of both doors to work on the speakers and apply some Dynamat.
Why does the passenger side window not work?
The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed. This is why I suspect you have two problems, since the window doesn’t work from either switch.
How many volts does the passenger side window have?
So, the white / yellow and the tan / light blue will have 0 volts with both switches released, as you found. The red / light blue is a different story. That is the 12-volt feed only for when the passenger switch is pressed. It is not used when the driver’s switch is pressed.
Why does my window only work in one direction?
When a window doesn’t work in only one direction and only from one switch, the culprit can be either switch, the driver’s or that passenger’s switch. That’s hard to understand at first, but there’s actually four sets of contacts in each switch, and two are in play in both switches, regardless which one is pressed.
Where does the blue light come from for the passenger window?
That red / light blue is right under my blue arrow. 12 volts feeds the passenger switch on that wire, and it comes through both sets of door hinges from the lockout switch on the driver’s assembly. The 12-volt feed to the driver’s switch has to be good for the other windows to work.
Why is my driver side power window switch not working?
The underlying problem is therefore almost certainly related to a break in the continuity of the interconnecting wiring between the passenger side window switch “UP” function contact of the driver side door switch, and the pass side window motor.
What happens if your power window is not working?
This is just one example of how technology has made life so much more convenient for drivers. However, there is one downside to having power windows. If there is ever an electrical problem with your vehicle or the electric motor inside the door fails, you will not be able to open and close your window until you get the problem fixed.
Therefore, the windows should go up and down without any input from the drivers side controls. When the window is lowered from the drivers side, power is sent through the switch on the passenger side door to lower the window. Since the window will not go down from from the passenger side, the place to check is there.
Front passenger window not working, not getting power to the switch either. The other three windows work great. Which color is the power for the passenger side? Where do I start? have the same problem?
What does it mean if your passenger side window switch has failed?
It means that the passenger side window switch has failed. The fact that the drivers switch operates the window properly lets you know that the window components all function properly as that the problem is probably electrical.
When the window is lowered from the drivers side, power is sent through the switch on the passenger side door to lower the window. Since the window will not go down from from the passenger side, the place to check is there. The window motor only has two wires because power will flow through one wire to raise the window.
How to repair a driver side window control that is not?
Isopropyl alcohol and Q-tips. When prying off the door release handle cover on the right side towards the hinged part of the door be sure to pull out on the handle while pulling the panel to the right to avoid breaking any of the brackets on the back. This fix is for 08-11 JEEP LIBERTY JOURNEY MASTER POWER WINDOW SWITCH BUTTON OEM 04602 632AG
What does Auto do on Nissan power window?
Using the “auto” feature of a power window switch automatically raises or lowers a power window to the fully closed or fully open position.
How can I control the passenger side window?
Then pull up on the switch to roll the window all the way up, and keep the switch up for an additional 3 seconds. Following this reset, the driver’s switches were able to command the passenger side window once again.
I have noticed a problem with my passenger side window switch. It will roll the window down, but it won’t roll the window back up. I can only roll the window back up using the switch on the driver’s side. In the past, I have taken the trim off of both doors to work on the speakers and apply some Dynamat.
Following the battery being replaced, the driver switches commanding all 4 windows failed to control the front passenger window. Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down.
How to fix power window since it can go down but?
Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down. Any other suggestions? Was this answer helpful?
Why is my passenger side window not going up?
My 2009 Elantra’s passenger window stopped going up yesterday. My husband took apart the passenger side door to access the motor. He cut two wires (not entirely sure which ones) and reconnected them to each other (green to blue and blue to green) to reverse the motor.
What makes a power window move up or down?
The mechanism that allows a power window to move up and down is called a window regulator. Each car door with a power window has a window regulator to move it. If the regulator goes bad, then pushing the up or down button will not make the window move.
Is the power window on the passenger side coming down?
Ford F-150 Questions – Power window on passenger side won’t come down. – CarGurus Power window on passenger side won’t come down.
Change master switch and passenger switch and the window regulator checked all the fuses still not working. Definitely confuse Master switch does not work at all for the passenger window all other windows work. The driver side window switch works but only goes up not down. Any other suggestions? Was this answer helpful?
When does the power window switch turn off?
When the power window switch sees the 5 volts return on the limit switch signal wire, the power window switch knows the window is fully closed and stops power window motor operation.
The mechanism that allows a power window to move up and down is called a window regulator. Each car door with a power window has a window regulator to move it. If the regulator goes bad, then pushing the up or down button will not make the window move.
What kind of truck has windows that roll down but not up?
The Chevrolet Silverado is a line of trucks under the Chevrolet brand and manufactured by General Motors. Mechanically, the GMC Sierra and Chevrolet Silverado are identical. I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window.
Why do my windows roll down but not up?
I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window. My driver door also has an issue with unlocking and locking the door, not sure it’s related or not.
How does the passenger side window roll down?
The passenger side switch does exactly the same thing for that window. draws amps down ( it’s already down) and no drain at all for up.
I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window. My driver door also has an issue with unlocking and locking the door, not sure it’s related or not.
The Chevrolet Silverado is a line of trucks under the Chevrolet brand and manufactured by General Motors. Mechanically, the GMC Sierra and Chevrolet Silverado are identical. I have a problem with my power windows. They all roll down using the driver door or their own switch but the only one that rolls up is the driver window.
Following the battery being replaced, the driver switches commanding all 4 windows failed to control the front passenger window. Upon reaching across the passenger seat, I found the passenger door switch still was able to command the window down.
What to do if your passenger side window is not working?
If it’s the passenger window that is malfunctioning, you can test the switch by using the driver side window controls. If it works using those controls, you will need to replace that window switch. If it’s the driver side window that’s not working, you’ll need to swap out the controls to test it.
What causes a power window to not work?
When you have a power window not working condition, most DIYers automatically suspect a bad power window motor. That’s usually not the case. If you have a power window not working issue, the fault is usually a broken window regulator, bad window switch, or a problem in the power window wiring. Passenger window not working
Why are my power windows not working in my car?
If you have a bad window motor, then the power to move the window will not exist. If you live in a region with a lot of snowy and icy conditions, this could compromise the functionality of your power windows. The reason is that the glass of the windows will stick to their frames.
How does a power window work in a car?
Every power window requires a window motor to supply the electrical energy. There is a gear at the end of the power window motor which connects with the window regulator. When you press the up or down button on your door, it activates the window motor which then allows the window regulator to move the window.
What to do when passenger side window won’t roll up?
6) Tried the passenger side regulator on drivers side. Doesn’t work. 7) Tried the three second reset with window half down and then raise fully up and hold for three seconds – this has to be done on passenger side with switch and regulator and then plugged in on drivers side. No difference.
6) Tried the passenger side regulator on drivers side. Doesn’t work. 7) Tried the three second reset with window half down and then raise fully up and hold for three seconds – this has to be done on passenger side with switch and regulator and then plugged in on drivers side. No difference.
What happens when a power window switch fails?
Window works from master switch only In some cases the window may not work from its own switch, but the master switch can still put the window up or down. In this case there is a good chance that the power window switch has failed and that the other window components are working properly. 4. Windows work sometimes
How to reset the power window control unit?
Move the driver’s (or the front passenger’s) window all the way down by using the drivers (or the front passenger’s) window DOWN switch 12. Pull up and hold the driver’s (or the front passenger’s) window UP switch until the window reaches the fully closed position, then continue to hold the switch for 1 second 13.