What are the symptoms of a transmission cooler failure?
1. Transmission Line Leak One of the most obvious transmission cooler failure or blown transmission line symptoms is a leak. When a line leaks, there will be transmission fluid on the ground near where the leak is coming from.
What to do if your transmission cooler is leaking?
If you simply notice that a line is leaking, that can be a simple fix depending on the location of the leak and line itself. Depending on the transmission cooling system routing, it is not too uncommon to have the transmission cooler lines leaking at the radiator if the lines are starting to rust.
Do you need a cooler for your transmission?
Transmission fluid works best at lower temperatures. Cool off your Ford, GM, Mopar and other vehicles with an add on transmission cooler. Transmission Coolers can add life to your transmission and prevent failures when you need your vehicle the most!
What are the fittings for a JEGS transmission cooler?
JEGS High Performance Transmission Coole… JEGS Brass Hose Adapter for 3/8 in. to 5… JEGS Transmission Fittings 1/8 in. NPSM JEGS High Performance Transmission Coole… JEGS Inverted Flare Steel Tube Nuts for …
What are the lines on a transmission cooler?
Barb to Barb – Used to connect two rubber lines together. These fittings are common for when you install a transmission cooler and keep the existing rubber lines on the vehicle. This type of fitting is found on both the transmission and radiator where there is a pre bent transmission line.
Where can I install an aftermarket Trans cooler?
When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler. These fittings are very cost effective and are typically only a few dollars at most and comes in packs with multiple fittings.
Where is the transmission cooler on a Dodge?
Trans Cooler Return Line Chart Transmission Location Chrysler / AMC 404, 413, 470 Top 41TE, 41AE, (604) Front 42LE Top
What causes oil to leak from transmission cooler?
Oil leaking or “weeping” from the hose or coupling can be caused when the hose deteriorates at the crimp site due to excessive heat. Exterior damage can be a result of oil contamination to the hose, prolonged exposure to ozone from auto exhaust, excess heat wear from any abrasion, and road debris.
When does a transmission need to be cool?
Like mentioned before, the internal components of a transmission require the right about of fluid to stay lubricated, but this helps keeps things cool as well. Once your transmission temperatures start to exceed 225, you will start to greatly reduce its lifespan.
What are the symptoms of a bad transmission?
This will cause your transmission to have very poor performance. This is the most noticeable signs of low transmission fluid Transmission fluid levels are critical when it comes to how your car shifts. Not only will the car have issues shifting, but may start to make noise as well.
1. Transmission Line Leak One of the most obvious transmission cooler failure or blown transmission line symptoms is a leak. When a line leaks, there will be transmission fluid on the ground near where the leak is coming from.
What causes a transmission cooler line to split?
Split or dented tubing can be due to road debris, rust aggravated by high salt concentrations or simply an impact from an accident. Leaking at threaded terminations can be caused by worn O-rings and gaskets, improper installation or the threads have become stripped for some reason.
If you simply notice that a line is leaking, that can be a simple fix depending on the location of the leak and line itself. Depending on the transmission cooling system routing, it is not too uncommon to have the transmission cooler lines leaking at the radiator if the lines are starting to rust.
What are the fittings for a transmission cooler?
These fittings are a push fit type that allow for a standard hose clamp to keep the transmission line in place. When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler.
Why are cooler lines important in a transmission?
The transmission cooling line system is vital to any automatic transmission. It circulates the hot fluid away to the radiator via cooler lines and returns the cooled fluid back to the transmission. A loss of fluid leading to an overheated transmission can be devastating as the system loses its ability to cool.
How does a transmission cooler work in a radiator?
In most applications where the external trans cooler is used in addition to the factory one, you will need to route the new transmission lines from the radiator to the external cooler. The below transmission cooler installation diagram shows the transmission fluid flow direction and how the fluid will be routed through a new external cooler.
How much does it cost to install a transmission cooler?
While installing basic rubber lines might work for most, in some cases, your vehicle may need custom lines, which are more costly than standard transmission lines. Depending on the cooler you purchase and your lines, you can spend as little as $20 extra to install a cooler, or in some cases, as much as $150 or more.