What is the OBD 2 fault code for Honda?
OBD II fault code P1259 is a manufacturer specific code that is defined by carmaker Honda as “VTEC System Circuit Fault (Bank 1)”, and is set on these applications when the PCM (Powertrain Control Module) detects a defect, malfunction, or failure in the electrical control/monitoring system of the VTEC mechanism on Bank 1.
How to fix Honda Civic engine code p1298?
How do I fix code P1298 HONDA Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P1298 HONDA Tech Notes There is a factory service bulletin for the following Honda models: – 2001–2005 Honda Civic
What is the error code for Honda Civic?
This error code is a manufacturer-specific trouble code, meaning it does not appear to all vehicle makes and models with OBD-II system or vehicles made since 1996 up to present. Rather, it applies to select vehicle manufacturers, most commonly among Honda vehicles like Honda Accord, Honda Civic, and Honda CR-V.
Where is the p1259 sensor located on a Honda Civic?
It should be noted though while that code P1259 specifically refers to a problem in the VTEC systems’ control/signal/monitoring circuit, some mechanical failure modes can contribute to this code being set and stored. Where is the P1259 sensor located? The image above shows the location of the VTEC oil control solenoid on a Honda Civic engine.
How do I fix code P1298 HONDA Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P1298 HONDA Tech Notes There is a factory service bulletin for the following Honda models: – 2001–2005 Honda Civic
This error code is a manufacturer-specific trouble code, meaning it does not appear to all vehicle makes and models with OBD-II system or vehicles made since 1996 up to present. Rather, it applies to select vehicle manufacturers, most commonly among Honda vehicles like Honda Accord, Honda Civic, and Honda CR-V.
Where is the OBD plug on a Honda Civic 6?
OBD connector location for Honda Civic 6 (1996 – 2000) You will find below several pictures which will help you find your OBD connector in your car. The OBD II port is located under the steering wheel. Go to the OBD2. scanner for HONDA. The OBD connector is visible above the pedals on the left. The OBD socket is next to the hood opening command.
How much does it cost to diagnose a Honda engine code?
The cost of diagnosing the P1298 HONDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What does code p1259 mean on a Honda?
As stated elsewhere, code P1259 refers to an electrical issue in the VTEC control system, and all diagnostic procedures for this code should start with a thorough visual inspection of all associated wiring and connectors. Nonetheless, some other common causes of code P1259 could include the following-
What is the fault code for a Honda Accord?
P1297 Electric Load Detector (ELD) Circuit Low Voltage P1298 Electric Load Detector (ELD) Circuit High Voltage P1300 Random Misfire P1324 Knock Sensor Power Source Circuit Low Voltage P1336 Engine Speed (RPM) Fluctuation Sensor Intermittent Interruption P1337 Engine Speed (RPM) Fluctuation Sensor No Signal
Where is the fault code reader located on a Honda?
In order to retrieve any stored DTC’s, either a fault code reader must be connected to the vehicle’s data link connector (located above the Service Check Connector), or read from the MIL in the instrument cluster. The service check connector (2-pin) is located under the dashboard, above the passenger side kick panel.
What does it mean when Honda Odyssey says p1491?
P1491 HONDA Tech Notes In some 1999–2003 Honda Odysseys and 2003 Honda Pilots, the EGR system may become contaminated or clogged. If this happens, the vehicle may hesitate or surge during light acceleration, and the MIL (malfunction indicator lamp)may come on with DTC P0401 (EGR insufficient flow) or P1491 (EGR valve insufficient lift).
What does DTC p1491 stand for in Honda?
If this happens, the vehicle may hesitate or surge during light acceleration, and the MIL (malfunction indicator lamp)may come on with DTC P0401 (EGR insufficient flow) or P1491 (EGR valve insufficient lift). If DTC P0401 or P1491 is stored, or if the engine hesitate or surges, clean the EGR port, install an EGR pipe kit, and clear the code.
What is the p1491 code on an Acura?
A position sensor indicates how far the valve has moved. When the PCM pulses the EGR solenoid on to a set location but does not see it reach that set location via the position sensor, code P1491 is set in memory. Code P1491 is a manufacturer specific code, mostly utilized by Honda, Acura and Isuzu.
What to do if DTC p0401 p1491 is stored?
If DTC P0401 or P1491 is stored, or if the engine hesitate or surges, clean the EGR port, install an EGR pipe kit, and clear the code. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.