Where can I Find my TV ribbon cable?
An error occurred while retrieving sharing information. Please try again later. Click to Find Your TV Part! Click to Find Your TV Part!
How big is a ribbon disk drive connector?
This size also allows for a two-row connector having a pin spacing of 0.1 inches. This type of ribbon cable is useful in floppy disk drive cables and custom parallel ATA cables. On the other hand, the number of connectors have values like 4, 6, 8, 9, 10, 14, 15, 16, 18, 20, 24, 25, 26, 34, 37, 40, 50, 60, 64 and 80.
Where does the power cable go on a DVD drive?
Connect the power cable to the power slot on the back of the drive. Like the data cable, the power cable can only be inserted one way, so don’t force it. If you don’t have an available power connector, you can buy an adapter that can provide additional connectors.
What’s the best way to remove a ribbon cable?
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon, please do not use a screwdriver to open ribbon connectors as it can damage the pins. • Gently guide the ribbon back into the connector. Match the line printed on the ribbon cable with the edge of the connector and close the tab on the top.
Connect the power cable to the power slot on the back of the drive. Like the data cable, the power cable can only be inserted one way, so don’t force it. If you don’t have an available power connector, you can buy an adapter that can provide additional connectors.
How do I install a new DVD drive on my computer?
Reassemble the computer and power it back on. Close up the case, return it to its position, and reattach the cables. Power on your computer. Wait for your operating system to detect the drive. Most operating systems will automatically detect your new DVD drive. Drivers for the drive are typically installed automatically.
How do I connect a DVD drive to my Motherboard?
Connect it to the next empty SATA port on your motherboard. Refer to your motherboard documentation if you cannot find the SATA ports on your motherboard. The SATA data cable can only be inserted one way on both the drive and the motherboard. Do not force the connection.
Where can I find an empty DVD drive?
Locate an empty 5.25″ drive bay. If you aren’t replacing an old drive, you will need to locate an empty bay. These are usually found on the front of the case, towards the top. You may have a drive or two already in this area. Remove the front panel to expose the bay. Attach any rails (if necessary).