Is the Honda Accord making a scraping noise?
The car is 4 months old and has already had the brake boosters replaced (trying to fix the brake clicking issue). It’s really sad to see all of these issues on a brand new vehicle.
Why does my Honda Civic make a loud scraping noise?
This article applies to the Honda Civic/Del Sol (1992-2000) and Accord (1990-2002). A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area.
Why are weird metal scraping sounds coming from wheel area?
Honda: Why are Weird Metal Scraping Sounds Coming from Wheel Area? No one likes hearing the sound of metal on metal, especially when pressing the brakes. Most of the time, that noise is simply the sound of your brake dust shield rubbing against the rotor. Occasionally, worn brake pads can cause your car to make the noise when you brake.
Why does my car make a metal scraping noise when I brake?
No one likes hearing the sound of metal on metal, especially when pressing the brakes. Most of the time, that noise is simply the sound of your brake dust shield rubbing against the rotor. Occasionally, worn brake pads can cause your car to make the noise when you brake. Both problems are simple to fix, and here’s how to do it.
What can I do about the scraping sound on my Honda Accord?
Replace and attach brake disk with two screws. Use 17mm socket and ratchet to tighten bolts holding the brake caliper in place. Use 12mm socket and ratchet to connect the brake line bracket. Remove brake dust by spraying rotors, pads, and calipers with cleaner.
This article applies to the Honda Civic/Del Sol (1992-2000) and Accord (1990-2002). A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area.
Where does the scraping noise come from in a car?
Q: Grinding/Scraping noise from the front right of the car when driving at low speeds. A loud scraping and grinding noise coming from the front right of the car. It only occurs at low speeds, 10-15mph, but not at speeds higher than that. The car drives normally at normal speeds, but it sounds shocking at low speeds.
What do you do if you hear a metal scraping sound in your car?
Use the drill to loosen the screws, and then use a Philips-head to remove the screws. You now can pull off the brake disk and access the brake dust shield. Use screwdriver – or even hands – to bend dust shield into place. Replace and attach brake disk with two screws. Use 17mm socket and ratchet to tighten bolts holding the brake caliper in place.