How do I stop my DSC alarm from beeping?
Note: DSC keypads also emit “normal” beeping caused by the “Chime” function. You can easily toggle this on or off by pressing and holding the “Chime” button on any keypad that has function keys. For keypads without a chime button, just press “*4”.
How do you clear the yellow light on a DSC alarm?
Press the ‘7’ key and you will receive a number corresponding to the affected zone. The indicated zone is reading a low battery condition and needs a replacement battery. Replace the battery in the contact and the condition will clear.
What does yellow triangle mean on DSC alarm?
trouble light
A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. After pressing this on the keypad, your zone lights should light up, communicating any trouble areas. Pushing # will silence the trouble sound.
How do I reset my DSC alarm light?
DSC alarms can go off for a number of reasons. To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter “*72” if the alarm is still ringing. Once the alarm is off, try to find out why it went off.
How do I stop my ADT alarm from beeping with low battery?
An ADT Alarm System’s low battery beeping can be silenced by pressing the “OFF” button or “#” button on your keypad. Depending on which version of the alarm system you have, pressing either of these buttons will silence beeping coming from your device.
How do you clear the memory on a DSC alarm?
To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.
How do I stop my fire alarm from beeping intermittently?
Resetting the Alarm
- Turn off the power to the smoke alarm at the circuit breaker.
- Remove the smoke alarm from the mounting bracket and disconnect the power.
- Remove the battery.
- Press and hold the test button for at least 15 seconds.
- Reconnect the power and reinstall the battery.