Why do I need to remove the front door panel on my Honda Civic?
TSX, ZDX, MDX, and RDX may also find these instructions to be helpful. A few of the reasons that you may need to remove a door panel on your Honda Civic is to add sound insulation such as Dynamat, replace the door speaker with an upgraded unit and replace a faulty power window motor/regulator assembly.
Where do the cable go on a Honda Odyssey sliding door?
You should cut the cables where they go into the van at the front and back of the roller track, and then at each side of the roller bracket on the door. If the cable ends pop out of the roller bracket hang onto them, you might want the nylon bushings on them if you ever put in new cables (see instructions).
Why is my Honda Odyssey sliding door not working?
The cable must be tangled up in the door motor spool unit and jamming the spool. If the spool is able to turn it should still be possible to open the door manually (motor will turn). On my door the cable was all twisted up and wound around the spool after it failed so I have to remove panels before I could get the door open.
What do I need to remove front door panel?
The only tools needed to remove the door panel include a Phillips head screwdriver and a flathead screwdriver or an automotive panel removal tool. Then unscrew the one Phillips head screw and set it aside.
Do you need to remove the cluster from a door lock?
If your vehicle has electronic door locks, you will need to remove the door lock cluster panel from the door panel as well. When removing the cluster panel, you need to remove the screws attaching it to the door panel.
What’s the best way to replace a door lock cylinder?
Gently pry the panel away from the door all the way around. A flat screwdriver or a door panel remover (preferred) helps here, but be gentle so you don’t damage the painted door around the panel. Once all the clips are loose, grab the panel top and bottom and bend it slightly away from the door.