What should I do if my Honda Odyssey crankshaft is stuck?
Using a penetrating oil prior to the job (like ottoman says) is a good idea. 240 ft-lbs. of torque may not be enough. I once used a torque multiplier, and it took about 500 ft-lbs. to remove one really crazy-stubborn crank bolt from a really, really old Accord. If playback doesn’t begin shortly, try restarting your device.
What to do if your crank pulley bolt is stuck?
The 50mm removal tool will be a necessity when you re-torque that horrid crank pulley bolt. Using a penetrating oil prior to the job (like ottoman says) is a good idea. 240 ft-lbs. of torque may not be enough.
What should I turn the breaker bar on a Honda Odyssey?
Can anyone confirm the position I should be turning the breaker bar ( or impact wrench) on a 2005 Odyssey EX-L (IVtec engine with VCM)? I believe it is the normal clock-wise on, counter clockwise off pattern with this model.
How big of a torque multiplier do you need for Honda Odyssey?
240 ft-lbs. of torque may not be enough. I once used a torque multiplier, and it took about 500 ft-lbs. to remove one really crazy-stubborn crank bolt from a really, really old Accord. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
Using a penetrating oil prior to the job (like ottoman says) is a good idea. 240 ft-lbs. of torque may not be enough. I once used a torque multiplier, and it took about 500 ft-lbs. to remove one really crazy-stubborn crank bolt from a really, really old Accord. If playback doesn’t begin shortly, try restarting your device.
The 50mm removal tool will be a necessity when you re-torque that horrid crank pulley bolt. Using a penetrating oil prior to the job (like ottoman says) is a good idea. 240 ft-lbs. of torque may not be enough.
How to fix harmonic balancer on Honda Odyssey?
I put a bit of a anti seize onto the tip before putting it back. and then use a 1/2 break bar with at least 36 inch extension to reach out of the wheel well, set the break bar to a jackstand and then, slide a 6ft steel pipe to the break bar to get enough leverage.
Can anyone confirm the position I should be turning the breaker bar ( or impact wrench) on a 2005 Odyssey EX-L (IVtec engine with VCM)? I believe it is the normal clock-wise on, counter clockwise off pattern with this model.
What to do if your crankshaft bolt is stuck?
Crank bolts are a pain to take out. But they are normally threaded. Lefty loosey. Have you sprayed any Lube onto the bolt? Do you have any silicone spray?
How to loosen a crankcase pulley on a Honda?
A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. A simple way to hold the crankcase pulley so that you can loosen or tighten it. No expensive hard to find tools required, just a chain and breaker bar. Skip navigation Sign in Search Loading…
What’s the crank pulley removal tool for Honda?
Please enter a question. The Powerbuilt 648796 50-millimeter Honda crankcase pulley removal tool keeps the crank pulley still, allowing users to easily loosen or tighten the crank pulley bolt in most Honda or Acura engines.
240 ft-lbs. of torque may not be enough. I once used a torque multiplier, and it took about 500 ft-lbs. to remove one really crazy-stubborn crank bolt from a really, really old Accord. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.