What is the correct pipe slope for DWV systems?
Horizontal drainage piping shall be run in practical alignment and a uniform slope of not less than one- fourth (1/4) inch per foot or two percent toward the point of disposal provided that, where it is impractical due to the depth of the street sewer or to the structural features or to the arrangement of any building …
What is DWV system?
The drain-waste-vent system, also known as the sanitary system, is all of the plumbing in your home minus the water supply system. This includes the drainpipes, drains, and vents.
Where should plumbing vent be located?
Vent pipes must be installed so they stay dry. This means that they should emerge from the top of the drainpipe, either straight vertically or at no less than a 45-degree angle from horizontal, so that water cannot back up into them.
Can I stack two sanitary tees?
You cannot use either one. You either stack two tees, which makes one drain lower than the other, or use the approved double fixture tee which is something about halfway between a cross and a double Y or double combination Y-1/8 bend, which is also illegal.
What is the difference between PVC and DWV?
The only real difference is that DWV PVC is not made to handle pressurized uses like schedule 40 parts are. Instead, DWV pipe and fittings are made to handle a different class of uses – Drain, Waste, and Vent (hence the name DWV). Another difference between DWV and standard PVC parts is the end types.
Can two toilets use the same vent?
The waste lines can usually be tied into the same stack if the house has more than one toilet. They may need their own stack if they are on opposite sides. Two vent openings on the roof are needed since the stacks must be vented.
Can a toilet and tub share a vent?
You can vent the bathroom with one 2″ vent. It stacks like this, toilet on the bottom, then tub, then lav. You can go 42″ on a 1.5″ trap arm to the tub and also to the lav.
https://www.youtube.com/watch?v=YGj-jijogmk