What does C mean on Stihl?
Comfort feature
High-performance saws to help make your job easier To help you identify model features, look for these corresponding symbols: C = Comfort feature, E = Easy2Start™, Q = an additional chain braking system, R = wrap handle, and M = STIHL M-Tronic™.
What do the numbers on a Stihl chainsaw bar mean?
The chain tells us it is made by Stihl. The number 6 on the cutter tells us the pitch is 3/8 lo pro or (picco) and the number 3 on the drive link indicates a gauge of . 050″ (or 1.3mm).
Why won’t my chainsaw start when it’s hot?
When your chainsaw quits after it gets hot, you either have a problem with gas flow being restricted into the engine or with the spark. This is a common occurrence on older-model chainsaws. By replacing your spark plugs and keeping your gas lines clear you can reduce the chances of this problem recurring.
What is the difference between ms170 and ms171?
The MS 170 has a displacement of 1.80 cu. in., fuel capacity of 8.5 oz., chain oil capacity of 4.9 oz., and powerhead weight of 8.6 lbs. The MS 171 has a displacement of 1.94 cu. Unlike the MS 170, it has tool-less fuel and oil caps with retainers and a side-access chain tensioner.
How can I tell what pitch my chainsaw is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What is the difference between Stihl green and yellow chain?
Green (go) marks those products which are designed to reduce the risk of kickback injury and comply with the ANSI B175. Yellow (caution) marks products with increased risk of kickback injury.
What size chain is on a Stihl 025?
The Stihl 025 and newer model MS250 (and the 023/MS230) will take two chain sizes and types: 1) the 3/8″ PICCO – . 050″ on 12, 14, 16 and 18 inch bars, and 2) the . 325″ – . 063″ on 15 and 18 inch bars.
What size chain do I need?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
How do you reset a warm chainsaw?
HOW DO I START MY CHAINSAW WHEN THE ENGINE IS WARM?
- Push the red on/off switch to the up/on position.
- Pull the saw until it starts. 2-3 pulls is normal.
- Do not press the primer.
- Do not pull out the blue choke lever. The choke should be left in the off position to avoid flooding a hot saw.
What happens if you overheat a chainsaw?
If you use it too much while it’s overheating, it’s possible you may burn out the engine or pistons causing you to have a broken chainsaw that will either need to be repaired or replaced. Following these tips can help to keep your chainsaw running smoothly for years to come.