How do you find out what year my PSE bow is?
Locate the data sticker on the PSE bow. The data sticker is located on the inside of the lower limb of the bow, near the handle. The data sticker identifies the bow and allows the manufacturer to access information regarding the bow such as its year, make and model.
What are the numbers on PSE limbs?
The 3 digit number tell you stiffness for limb order. The two digit numbers are the deflection number that will yield different draw weights based on which bow. All your limbs should have a 22 stamped next to the numbers you have listed. middle two numbers bottom limbs.
Does a crossbow have a serial number?
The crossbow serial number can be located in one of two places. It will be a seven digit number starting with a 9. If not, then turn your crossbow upside down and look inside the rail, towards the stock, behind the trigger assembly. The serial number will be on a sticker and start with XB followed by five numbers.
How do you read a bow limb?
The numbers on your limb indicate the draw weight at two different riser lengths (25 and 23 inches). The number in the middle indicates the total bow length (between 70 and 50 inches). Most adults use a 25-inch riser and should look at the upper two numbers to find the bow length and draw weight.
Can a PSE X technology bow be serviced?
PSE X TECHNOLOGY PSE X Technology bows come with many unique features that will enhance your archery experience. USING A BOW PRESS WITH X TECHNOLOGY BOWS ALL PSE X Technology bows MUSTbe serviced in an approved bow press and require special consideration.
What happens if you dry fire a PSE bow?
Dry-firing is drawing and releasing the bowstring without an arrow on the string. Dry-firing will likely cause damage to the bow and serious injury to the archer. In the event of a dry-fire, have an authorized PSE dealer inspect the bow for damage.
How often should a PSE bow be inspected?
It is recommended that this service be performed at least once a year by an authorized PSE dealer. All components, including string, cables, axles, e-clips, limbs and riser should be carefully inspected for damage or wear.
Do You need safety glasses for a PSE bow?
As with any weapon, safe operation of your PSE bow must always be the highest priority. ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW. Do not attempt to use your bow without proper instruction. Doing so can result in serious injury. a. NEVER DRY-FIRE YOUR BOW. Dry-firing is drawing and releasing the bowstring without an arrow on the string.