What kind of wrench do I need to remove belt on Honda Accord?
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
How do you remove serpentine belt on Honda Accord?
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
How do you change the timing belt on a Honda Accord?
To do this, turn the crankshaft with a socket and the ratchet attached to the threaded bolt on the front of the crankshaft. Rotate until the TDC mark on the crankshaft pulley is aligned with the pointer on the lower cover timing belt. 6) Loosen the front right wheel nuts.
Why is the belt on my Honda Accord whining?
Not replacing the belt can lead to serious damage to your motor. Often, the telltale sign that a belt is “going” is a noticeable screech or whining sound. It’s caused by the friction of the belt against the pulley.
How do you release tension on a Honda Accord?
To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown. On the Honda Accord, this is a 14mm hex head on the tensioner pulley.
A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.
Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.
To do this, turn the crankshaft with a socket and the ratchet attached to the threaded bolt on the front of the crankshaft. Rotate until the TDC mark on the crankshaft pulley is aligned with the pointer on the lower cover timing belt. 6) Loosen the front right wheel nuts.
Where is the number one piston on a Honda Accord?
5) Place the number one piston at the top dead center (PMS), which is the highest point on the cylinder that each piston reaches as it moves up and down during crankshaft rotation. To do this, turn the crankshaft with a socket and the ratchet attached to the threaded bolt on the front of the crankshaft.