How long should a string be for a 60 inch recurve bow?
The measurement is taken from the outside of each peg. ATA Specs say that a bow should be properly braced with a string that measures 3″ shorter than the bow. So if a bow is 60″ is should be braced properly with a string measuring 57″ under 100 lbs of tension after 20 seconds.
What size string do I need for a 58 recurve bow?
This means that you have a 58 inch bow from tip to tip and a poundage of 30 at a 28″ draw length. Since the length of the bow is 58 inches you would need a 58″ AMO bowstring. However, AMO measurements have actual string lengths that are 4 inches less. Therefore, your 58″ AMO string is really only 54″.
How long should my recurve bow be?
Bow Length Most recurves commonly come in lengths of 58, 60, and 62 inches. The old rule was if you had a short draw length, less than 28 inches, you should shoot a 56 or 58-inch bow. For 28 to 29½-inch draw lengths, a 60-inch bow would perform best.
What is AMO length recurve bow?
AMO length is a standard measurement of bow length that is designated to be three inches longer than the bowstring. It usually applies to Recurve Bows and other “conventional bows”.
How long should the string be on a 62 inch recurve bow?
AMO specs state that a recurve or longbow should be braced properly with a bowstring that’s 3” shorter (under 100lbs of tension) than the AMO length of that bow. Most traditional bows will be labeled around the grip area with the AMO length.
How long should my bow be?
The old rule was if you had a short draw length, less than 28 inches, you should shoot a 56 or 58-inch bow. For 28 to 29½-inch draw lengths, a 60-inch bow would perform best. For draw lengths over 29½ inches, a 62-inch bow would be the best choice. I’ve found 60 inches to be a happy medium.
How is riser length measured?
Riser length is a physical measurement from limb bolt to limb bolt center and then add 5″ Why do they do that? Why not just say its a 20″ riser because one can actually measure 20 inches, instead of adding 5 inches to make the number bigger? Or string length is the bow length minus 3 inches.
What is the best string for a recurve bow?
SAS B-50 Dacron Recurve Bow String. The SAS B-50 is the best recurve bow string for those who want a dacron string that is durable and long lasting. There are plenty of sizes to choose from and we are sure you can find a size that is the perfect fit for your recurve bow.
What size recurve bow should you get?
70-72″. For target recurve bows, you may be looking at a takedown bow with different limb lengths available for a specific riser. You’ll need some math. Bowhunting recurve bows, or those used for 3-D and field archery, are often shorter for portability and maneuverability.
What size recurve bow?
Today, the typical recurve bow is between 48 and 70 inches in length. Some experts say a recurve bow should not be shorter than 58 inches. A longbow usually is between 4 and 6 feet long, and its length can depend on the height of the archer.
How long is the bow string I Need?
The AMO shows the tip-to-tip length of the bow, and has become an accepted rule among various bowmen and archers. They consider a bowstring length of 3″ as the correct string length on a longbow. While on a recurve bow, it is 4″ less the AMO.