What is PA2200?
PA2200 is a high-performance alternative to plastics like ABS or PA6 that have proven their value in injection moulding. The additively manufactured end products are just as strong, flexible and durable as moulded parts.
What is PA 12 material?
PA 12 (also known as Nylon 12) is a good general-use plastic with broad additive applications and is known for its toughness, tensile strength, impact strength and ability to flex without fracture. PA 12 has long been used by injection molders due to these mechanical properties.
What is pa11 material?
The high-performance plastic polyamide 11 (PA 11) is made from 100% renewable castor beans. PA 11, also known as nylon, is chemically and mechanically heat-resistant and is ideally suited for highly technical applications thanks to its durability.
Is PA12 biocompatible?
Polyamide parts have excellent long-term stability and are resistant against most chemicals. They can be made watertight by impregnation. The PA material used by Materialise is certified as biocompatible and food-safe under certain conditions.
Which is stronger ABS or nylon?
Nylon is a flexible, durable plastic with less strength and stiffness than both PLA and ABS. Nylon is tougher and more resistant to chemicals than ABS and PLA, but its low strength and stiffness keep it from being widely used in the manufacturing industry.
What is the difference between nylon 11 and Nylon 12?
Nylon 11 is derived from castor oils and Nylon 12 comes from butadiene. Nylon 12 has a slightly lower melting point and density and Nylon 12 performs better at high temperatures and has superior UV resistance. Their advantages include low moisture absorption (.
Which is stronger nylon or ABS?
What is the difference between PA11 and PA12?
Unlike PA11, Nylon PA12 is a synthetic whitish fine powder derived mainly from petroleum sources. It is optimized as much as PA11 for the use as a laser sintering material. Nylon PA12 has many manufacturers which include Arkema and Evonik, whereas PA11 is only manufactured by Arkema.
What is the difference between nylon 11 and nylon 12?
What is the difference between PA6 and PA12?
PA12 presented a reduction in stiffness and a stress reduction of 1.4 MPa after 7000 cycles. The PA6/PA12 80/20 and 50/50 blends showed lower stiffness than the undiluted PA6, due to the presence of PA12 in the specimens. The PA6/PA12 blend with 80% (20/80) of PA12 had the lowest stiffness.
Is PA12 a thermoplastic?
The PA 12 has the lowest water absorption and is the lightest of all polyamides, ie, lighter thermoplastic technopolymer, favoring especially economic solutions is crucial for the aeronautical transport for automobile construction, in electrical applications and the lightest sports sector provided by the market.
What kind of material is PA 2200 made of?
Parts made from pigment free polyamide 12 powder are also white but appear slightly more transparent. This material is approved for contact with food (FDA, 21 CFR) and its other properties are similar to PA 2200 – strength, rigidity and good chemical resistance.
What is the property profile of PA 2200?
The property profile of durable white parts made from PA 2200 is very balanced: such parts are characterized by strength, rigidity and good chemical resistance. They are also biocompatible and certified for contact with foodstuffs.
What is the surface finish of pa2200 nylon?
The natural surface finish is smooth, but has a powdery feel to it. This is comparable with an extra strong mint. To improve the surface finish we have two options, the first is Shot peening, that greatly improves the surface finish for PA2200 SLS printed parts bringing them very close to the finish of an injection moulded part.
What kind of material is PA 3200 GF?
PA 3200 GF – Polyamide 12 Filled With Glass Beads Parts made from this white polyamide 12 powder filled with glass beads have high rigidity and good elongation at break. They are also especially resistant to wear and tear, and thermally resilient. This material is used mostly in vehicle engines and molding material for deep-drawing tools.