How long will Corroseal last?
a 12 month
Corroseal typically has a 12 month shelf life when stored as instructed in the technical data sheet, although in some cases it may last longer or shorter than this period.
Is Corroseal better than por 15?
Corroseal is a rust converter, POR15 is a rust encapsulator, but it also was designed to work best on bare metal, and it bonds best to rusted metal.
Does Corroseal stop rust?
Yes, but Corroseal works best when rust is present. Do not apply Corroseal over Cor-ten steel, cold rolled steel, stainless steel or any steel that has been chemically treated.
How long does it take for Corroseal to turn black?
STEP 3: Apply Corroseal STEP 3: Using a brush, roller or spray, apply a thick coat of Corroseal. The thicker, the better. It will be white when first applied, then begin to turn black as it converts rust. Check in 15 minutes, if brown or gray spots peak through, apply another thick coat.
Is Corroseal safe?
This helps make it incredibly safe for use, Corroseal also guarantees that it’s non-flammable and non-corrosive. While still being an industrial strength product, it is easy to clean up with just soap and water. Although Corroseal is one of the best rust neutralizers, it is not perfect.
Can Corroseal get wet?
Corroseal™ will tolerate some moisture. However, this does not include running, dripping, or sweating conditions….Technical Information.
| Description | : Water based, unpigmented, styrene butadiene, elastomeric polymer, with rust converting modifiers. |
|---|---|
| Recommended total wet film thickness | : 8 to 10 mils, 200 to 250 microns |
Can you use Corroseal on bare metal?
Corroseal needs the rust to bond to. If you’re at bare metal an epoxy primer would be best. Make sure you use a solvent to clean the surface to remove any dirt or oils that may have come from your hands. I’ve had great success with Corroseal on light to heavy rust.
What is Corroseal made of?
Corroseal converter chemistry is a proprietary technology based on very mild acids combined with an unpigmented, improved metal primer, a copolymer created from styrene butadiene (latex) chemistry. Corroseal is a water based rust converter combined with an unpigmented high quality copolymer latex metal primer.
How do you clean Corroseal?
Oil and dirt can make it difficult for Corroseal to adhere and react as needed, so cleaning first is crucial. Do not use an oil based cleaner for this step. We highly recommend Corroseal Cleaner for metal surface prep. Rinse thoroughly after cleaning.
What is the active ingredient in Corroseal?
that uses oxalic acid as the rust converting compound. Like Corroseal®, it also incorporates ethylene glycol in the chemical composition. Oxalic acid as an active ingredient—a compound that exhibits different physical properties after conversion.
What color is Corroseal?
Corroseal® Visual Inspection Purple black to black surface over rusted areas.
How do you prepare Corroseal?
Follow these four easy steps and breathe new life into your work.
- STEP 1: Prepare the Surface. STEP 1: To start, remove large pieces of rust scale so Corroseal has a surface of fine rust to convert.
- STEP 2: Clean the Surface. STEP 2: Scrub clean removing oil and dirt.
- STEP 3: Apply Corroseal.
- STEP 4: Paint & Enjoy.
What do you need to know about corroseal rust converter?
Corroseal rust converter is an elite, industrial strength product for all your marine, household, automotive, and industrial rust problems. Extend the life of your metal equipment by protecting it from rust and corrosion. Rust occurs naturally when the iron in steel oxidizes and returns to its original state, iron oxide.
What does corroseal do for oil based paint?
Corroseal is well known as a high quality and consistent product by those who routinely deal with the painting rusted metal. Corroseal serves as the primer and bonds with oil based paint, epoxy, urethane and most other top coats. Remove all salt, loose rust, mill scale, dirt, grease, oil, old paint and other deposits.
What’s the best way to apply corroseal in the weather?
Use oil based marine or industrial coatings for best weather protection. Keep from freezing, Apply at 45°F and rising and below 100°F (7°-37°C) and falling. Test over zinc based coatings as some galvanizing reject Corroseal® chemistry. Do not apply onto zinc chromate or phosphates, lead, magnesium, copper powder, graphite, borate pigments.
Do you remove corroseal and re-apply it?
Remove Corroseal®, re-clean the area, and re-apply Corroseal®. Speckled discoloration indicates mineral salts or other chemical contamination. Remove Corroseal®, re-clean the area, and re-apply Corroseal®.