Can a Honda Accord go above 5000 rpm?
Engine will not go above 5000 RPM. My older Accord will not go above 5000 RPM lately. It’s almost as if a rev limiter is engaged. I rarely go above 5000 RPM but sometimes, when you need to get on the highway, you need it.
Why does my Honda Accord Rev at low rpm?
This article will discuss why your Honda Accord continues to rev at low RPM, and which road to take to resolve the issue. This article applies to the Honda Accord (1990-2002). Many motoring experts dissuade car owners from excessively revving their cars as it can result in engine damage. This is especially so when the car is stationary.
What kind of engine does a Honda Accord have?
F23A1 was a typical engine with a VTEC system and the compression ratio of 9.3. Its power was 152 HP @ 5,700 rpm, the torque was 205 Nm @ 4,900 rpm. Such an engine was installed in Honda Accord and Acura CL. 2. F23A4 was an analogue to F23A1, but oriented to higher environmental standards.
What are the valve clearances on a Honda F23A?
Valve clearances for a cold engine are as follows: intake valves 0.23-0.27 mm, exhaust valves 0.27-0.33 mm. The firing order on this engine is 1-3-4-2.
Why does my Honda Accord Rev at 4, 000 rpm?
Consequently, the ECU will again restrict the amount of fuel injected into the engine, and hinder the Honda Accord’s optimal performance. Ultimately, if there’s a low or disproportionate air and fuel supply, the engine won’t rev beyond 4,000 RPM.
Valve clearances for a cold engine are as follows: intake valves 0.23-0.27 mm, exhaust valves 0.27-0.33 mm. The firing order on this engine is 1-3-4-2.
F23A1 was a typical engine with a VTEC system and the compression ratio of 9.3. Its power was 152 HP @ 5,700 rpm, the torque was 205 Nm @ 4,900 rpm. Such an engine was installed in Honda Accord and Acura CL. 2. F23A4 was an analogue to F23A1, but oriented to higher environmental standards.
How often do you change intake valves on a Honda F23A?
The valve diameter remained the same as in F22A: 34 mm intake valves and 29 mm exhaust valves. The camshaft is rotated by the timing belt, and its replacement is required after every 60,000 miles. When the timing belt breaks, valves in the engine get bent. The valves are to be adjusted after every 25,000-30,000 miles.
Engine will not go above 5000 RPM. My older Accord will not go above 5000 RPM lately. It’s almost as if a rev limiter is engaged. I rarely go above 5000 RPM but sometimes, when you need to get on the highway, you need it.
Can a car engine go above 5000 rpm?
Guest, The rules for the P & N subforum have been updated to prohibit “ad hominem” or personal attacks against other posters. See the full details in the post “Politics and News Rules & Guidelines.” Engine will not go above 5000 RPM. My older Accord will not go above 5000 RPM lately. It’s almost as if a rev limiter is engaged.
What to do about Honda Civic engine hesitating?
A few simple fixes suitable for the novice mechanics might be enough to rid your Honda Civic or Accord of that annoying low-RPM hesitations forever. This article applies to the Honda Civic/Del Sol (1992-2000), and Accord (1990-2002).
Why does my Honda engine idle all the time?
If you have found no vacuum leaks and the problem persists, move on to the following step. Air in the cooling system is another common source of idle issues in Honda vehicles. If you’ve recently opened the cooling system to replace a part or change out the coolant, verify that you have no coolant leaks.