How to connect to ALOM console?

How to connect to ALOM console?

Connecting to ALOM

1. Connect an ASCII terminal directly to the SERIAL MGT port.
2. Use the telnet command to connect to ALOM through the Ethernet connection attached to the NET MGT port.
3. Connect a port on a terminal server to the SERIAL MGT port, and then use the telnet command to connect to the terminal server.

How to login to ILOM console?

Access the Host Console From the Oracle ILOM CLI

1. Log in to the Oracle ILOM command-line interface.
2. Type start /HOST/console.
3. Type y to confirm that you want to access the host console.
4. If you are prompted for user credentials, enter the requested information to access the host server operating system.

How to take ILOM console?

How To Access the System Console Remotely Using the ILOM CLI

1. Establish an SSH connection using the following command, and then enter the default password (changeme) when you are prompted:
2. To power on the system, type the command: start /SYS.
3. To start the system console, type: start /SP/console.

What is ALOM in Solaris?

The ALOM command shell is a simple command-line interface. Through the ALOM command shell, you can administer, diagnose, or control the host server, and you can configure and manage ALOM. You are in the ALOM command shell when you see the sc> prompt.

Where is ilom IP address in Linux?

How to Display the ILOM IP Address Using the Web Interface

1. Type your user name and password.
2. Click Log In.
3. Select the blade and node to view from the left pane.
4. Make a note of the node’s SP IP address.
5. Repeat Step 4 to find the IP address for the server’s other node SP.

How do I get to OK prompt from Xscf?

To switch from the XSCF console to the ok prompt, enter the console -d 0 command. To switch from the ok prompt to the XSCF console, press the enter key, and then press the “#” and “.” (period) keys.

How do I change my IP address on ilom?

To set a static IP address for the ILOM using the CLI and a serial line connection, do the following.

1. Establish a serial connection to the ILOM.
2. Log in to the ILOM.
3. Type the following command to set the working directory.
4. Type the following commands to specify a static Ethernet configuration.
5. Log out of the ILOM.

How do I get to OK prompt?

You may need to send a stop-a if the “ok” doesn’t appear. Sometimes the system hangs going down. On a Sun keyboard, press the two keys STOP and A . That will get you an OK prompt.