Where is the engine check plug?
This is a 16-pin connector you’ll plug the reader into. It’s usually located under the driver’s side of the dash, but each vehicle is different. Check your owner’s manual or a repair manual if it’s hard to find.
Where is the OBD plug on a Honda Accord?
You will find below several pictures which will help you find your OBD connector in your car. The OBD2 socket is located under the steering wheel in the fuses box OBD socket is near the hood lever You can see the diagnostics port near the fuses
Where is the diagnostic port on a Honda Accord?
For the 1990 to 1995 Honda Accords, the diagnostic port is located by the passenger’s side kick panel. To access the connector, remove the panel using a Phillips screwdriver. For the 1996 to 2002 Honda Accords, the diagnostic port is located just bellow the bottom edge of the driver’s side dash.
What happens when a spark plug fails in a Honda Accord?
In a nutshell, when the igniter or ignition coil fails in your Honda (Accord, Civic, or Odyssey), it won’t start. When the spark plug wires or the distributor cap fail, your Honda will start and run but with a misfire. The misfire may or may not light up your check engine light on your instrument cluster.
Where are the computer connectors on a Honda Accord?
There are seventeen typical auto computer connector locations. They are: Behind an ashtray. Bottom dash, above the hood release. Dash on right, underneath. Driver side of dash, above hood release-left hand side of instrument panel. Front of center console, driver side. Front of center console, passenger side.
For the 1990 to 1995 Honda Accords, the diagnostic port is located by the passenger’s side kick panel. To access the connector, remove the panel using a Phillips screwdriver. For the 1996 to 2002 Honda Accords, the diagnostic port is located just bellow the bottom edge of the driver’s side dash.
There are seventeen typical auto computer connector locations. They are: Behind an ashtray. Bottom dash, above the hood release. Dash on right, underneath. Driver side of dash, above hood release-left hand side of instrument panel. Front of center console, driver side. Front of center console, passenger side.
Where can I find the DTC code on my Honda Accord?
On an OBD-I scanner, you will be able to retrieve codes through a series of flashes. Each DTC corresponds to a different problem in your vehicle. Search through the Honda Accord’s automotive repair manual or search online for the DTC to diagnose the exact problem, and then decide how to repair it. Figure 5.
In a nutshell, when the igniter or ignition coil fails in your Honda (Accord, Civic, or Odyssey), it won’t start. When the spark plug wires or the distributor cap fail, your Honda will start and run but with a misfire. The misfire may or may not light up your check engine light on your instrument cluster.