Where are the brake lines on a Honda Accord?
Front brake lines on driver’s side. The mid line bracket is there simply to keep the line in place. You’ll likely need your 12 mm socket to remove this connection. Figure 2. Driver’s side brake lines circled.
How big of a fuel line do you need for a Honda Accord?
You can buy rolls of 3/16″ and 1/4″. The brake lines should be 3/16″ (4.8mm) going to the rear wheels. There should be a supply fuel line, 3/8″ (10mm) and return 1/4″ (4.8mm). If my memory serves (but probably won’t) Honda usually puts a junction fitting near the tank for the supply, but the return goes up to the top of the tank.
What happens if you replace the fuel line in a car?
If the rust is as severe as I suspect that it is, even if you replace the brake lines and fuel line, the car will soon be unable to absorb an impact, due to the weakening of its unitized structure.
Can a car brake line be rusted out?
Yes, undercarriage and steel brake line corrosion is a fact of life here in snow country even though car bodies don’t rust so fast now where you can see them. When a car gets older than about 10 or 12 years, it’s a good thing to push as hard as you can on the brake pedal to try to burst a line that might fail during a panic stop.
You can buy rolls of 3/16″ and 1/4″. The brake lines should be 3/16″ (4.8mm) going to the rear wheels. There should be a supply fuel line, 3/8″ (10mm) and return 1/4″ (4.8mm). If my memory serves (but probably won’t) Honda usually puts a junction fitting near the tank for the supply, but the return goes up to the top of the tank.
What are the brake lines on a 1998 Honda Accord?
My son has a 1998 Accord Coupe. Pedal to the floor at a stop sign yesterday and a massive amount of brake fluid on the road. Quick thinking with the parking brake averted a disaster. A quick look underneath shows 4 or 6 corroded metal brake lines.
Where is the mid line bracket on a Honda Accord?
The mid line bracket is there simply to keep the line in place. You’ll likely need your 12 mm socket to remove this connection. Figure 2. Driver’s side brake lines circled. The last connection from the still line to the flex line is one that you need to be careful of.
Yes, undercarriage and steel brake line corrosion is a fact of life here in snow country even though car bodies don’t rust so fast now where you can see them. When a car gets older than about 10 or 12 years, it’s a good thing to push as hard as you can on the brake pedal to try to burst a line that might fail during a panic stop.
What’s the shop manual for a Honda Accord 89?
Not only is the illustration quality very high, but everything is ready for printing! These manuals contain new additions for the 87, 88, and 89 years. For example, in the 89 manual, there is a section for the B20A engine series (2.0 DOHC) that came in the European accords.
Where to find Honda Accord Aerodeck shop manual?
For example, in the 89 manual, there is a section for the B20A engine series (2.0 DOHC) that came in the European accords. In order to read the PDF files, you will need to use Adobe Acrobat Reader, which can be downloaded, from the following site: http://www.adobe.com/products/acrobat/readermain.html
What are the different parts of the Honda Accord?
Honda Accord Parts & Accessories. Honda Accord A/C Compressor. Honda Accord Alternator. Honda Accord Axle Assembly. Honda Accord Ball Joint. Honda Accord Blower Motor. Honda Accord Blower Motor Resistor. Honda Accord Brake Booster. Honda Accord Brake Caliper.
How do you remove a fuse from a Honda Accord?
Removing these fuses requires a Phillips-head screwdriver. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse boxes by pulling out each fuse with the fuse puller provided in the under-hood fuse box. Look for a burned wire inside the fuse.
How big is the wheelbase of a Honda Accord?
Originally offered only in two-door hatchback form, the Accord rode a 93.7-inch wheelbase, weighed about 2,000 pounds and sported a clean, uncluttered body style. The interior design featured a combination of comfortable seating, logical control/gauge placements and topnotch-quality switchgear.