How do you replace the brake stand on a Honda Accord?
Accord jack stand locations. The rest of the instructions will apply to both the passenger and driver sides of the car. Use a screwdriver or a nail and hammer the spindle bolt in the void where the metal bends in to make it form a circle so you can pull it off. Use a 36 mm socket and long handled ratchet to remove this bolt.
How do you replace rotors on a Honda Accord?
Honda married the hub and wheel bearing unit together and the rotors behind that. These have to come off to get to the rotors. Place the hub-puller over two lug nut screws and screw those two lug nuts back on. Put the hub puller cross-member on and screw that center bolt down until the hub and wheel bearing pop off.
How do you replace the caliper on a Honda Accord?
Remove the bolts, and the caliper will come right off. Set the caliper aside if it is still good and doesn’t need replacing. Otherwise, you’ll install the new caliper after the rotors are replaced. If you are going to replace the calipers, you’ll need to bleed the lines at this point.
How do you jack up a Honda Accord?
Jack the front end up high enough to get the jack stands under the correct location points. Set the car on the jack stands and remove the wheels. (Related Article: How to Jack Up Your Accord – Honda-Tech.com) Figure 1. Accord jack stand locations. The rest of the instructions will apply to both the passenger and driver sides of the car.
Accord jack stand locations. The rest of the instructions will apply to both the passenger and driver sides of the car. Use a screwdriver or a nail and hammer the spindle bolt in the void where the metal bends in to make it form a circle so you can pull it off. Use a 36 mm socket and long handled ratchet to remove this bolt.
Honda married the hub and wheel bearing unit together and the rotors behind that. These have to come off to get to the rotors. Place the hub-puller over two lug nut screws and screw those two lug nuts back on. Put the hub puller cross-member on and screw that center bolt down until the hub and wheel bearing pop off.
Remove the bolts, and the caliper will come right off. Set the caliper aside if it is still good and doesn’t need replacing. Otherwise, you’ll install the new caliper after the rotors are replaced. If you are going to replace the calipers, you’ll need to bleed the lines at this point.
Jack the front end up high enough to get the jack stands under the correct location points. Set the car on the jack stands and remove the wheels. (Related Article: How to Jack Up Your Accord – Honda-Tech.com) Figure 1. Accord jack stand locations. The rest of the instructions will apply to both the passenger and driver sides of the car.
Which is the best brake rotor for a Honda Accord?
Our high-quality performance rotors are machined and balanced more precisely to reduce vibration and promote a longer, smoother brake life. They also do a great job venting hot gases away from the rotor, allowing for better cooling. Come by your local AutoZone for Honda Accord brake rotors, or shop.