What are the ball joints on a Honda Civic?
This article applies to the Honda Civic (1992-2000). Ball joints are the smallest components that play a big role in making sure you arrive safely to your destination. Think of them as pivots that allow the suspension to flex as your wheel moves. You can tell if they need a replacement just by looking at them.
When do you Know Your Honda ball joint is failing?
Here are some symptoms showing your ball joint needs your extra attention: if you hear s creaking voice from the ball joint; if there is a uneven tire wear or your Honda is getting pulling, there is a possibility that your ball joint is failing.
Where is the place Jack on a Honda Civic?
Place jack stands under the pinch welds. With the flat head screwdriver, undo the clip on the center of the spindle nut. With the 32 mm deep well socket, loosen the spindle nut by rotating it counterclockwise. This is easier if you position the wrench to push down instead of up.
How big is the spindle nut on a Honda Civic?
Spindle nut could be 36 mm depending on the your Accord’s model year. Once the spindle nut is off, unfasten the two bolts on the back of the caliper. Unfasten two additional bolts securing the brake line to the knuckle. Remove the caliper assembly, and use a bungee cord or zip ties to hang the caliper.
This article applies to the Honda Civic (1992-2000). Ball joints are the smallest components that play a big role in making sure you arrive safely to your destination. Think of them as pivots that allow the suspension to flex as your wheel moves. You can tell if they need a replacement just by looking at them.
What happens when a front ball joint fails?
Should a ball joint break, the wheel becomes totally free to move in any direction, which can damage the car’s fender, tire, and several suspension components, if not more. Usually, when front ball joints start to fail, the vehicle will display a few symptoms that alert the driver a problem has occurred.
Why are ball joints important to a vehicle?
Because ball joints are an important component of any vehicle’s suspension. When they begin to have problems or fail, the overall handling and ride characteristics of the vehicle are likely compromised.
Place jack stands under the pinch welds. With the flat head screwdriver, undo the clip on the center of the spindle nut. With the 32 mm deep well socket, loosen the spindle nut by rotating it counterclockwise. This is easier if you position the wrench to push down instead of up.
Spindle nut could be 36 mm depending on the your Accord’s model year. Once the spindle nut is off, unfasten the two bolts on the back of the caliper. Unfasten two additional bolts securing the brake line to the knuckle. Remove the caliper assembly, and use a bungee cord or zip ties to hang the caliper.
How do you replace ball joint on McPherson strut?
Leave the castellated nut in place, just a few turns in to keep it in a safe place. If you’re working on a McPherson strut suspension remove the “pinch bolt” that clamps the ball joint stud. Pop loose the ball joint.
How can I check the ball joint on my car?
Figure out if your vehicle’s got a strut-style suspension or a control arm, then check the ball joint by either jacking up the control arm near the ball joint to check for wheel play, or by jacking up the car and using a pry-bar to check for wheel play in a strut-style suspension.