Is airFiber 5G?
Globe at Home 5G Air Fiber is the first commercial 5G network in Southeast Asia.
How does airFiber Internet work?
AirFiber internet is a fixed wireless, high-speed broadband service that utilizes fixed-location microwave radio towers instead of phone or cable lines to deliver internet access to your location. A wireless router connected to a computer via an ethernet cable translates data into radio signals.
How do I install airFiber?
Connect Power over Ethernet to the Data port, and connect an Ethernet cable between your computer and the Management port. Configure the device settings in the airFiber Configuration Interface. Once configuration is complete, disconnect the cables to move the airFiber radios. Pre-assemble the mounting hardware.
How do I connect airFiber 5XHD?
Connect the airFiber PoE Adapter to the Data port, and connect your computer to the MGMT port. Configure the AF-5XHD. Recommended: Install the IP67 Upgrade Kit (included) to prevent intrusion by water, dust, and insects. Install a ground wire and mount the AF-5XHD on an airFiber X or RocketDish antenna.
Is Smart 5G ready?
The new Smart 5G-ready SIM is available at the Smart Online Store, the Smart Flagship Store on Lazada, and at accredited retailers nationwide. Smart customers can make the most of their digital lifestyle with the GigaLife App, a one-stop app that puts all their needs within easy reach.
Is Globe 5G fast?
Globe 5G is up to 20x faster than LTE with fiber-fast speeds of up to 100 Mbps. It has an almost real-time latency allowing faster response time needed for new technologies.
Is AirFiber wisp down?
We are back up and running! If you are experiencing any issues, please call tech support at (623) 363-3823.
What is P2P in PLDT?
A P2P network can be an ad hoc connection—a couple of computers connected via a Universal Serial Bus to transfer files. Or a P2P network can be a network on a much grander scale in which special protocols and applications set up direct relationships among users over the Internet.
How do I reset my af24?
Interface Description Reset To reset to factory defaults, press and hold the Reset button for more than five seconds while the unit is powered on. Data 10/100/1000 Mbps port handles all user traffic.
How do I reset my airFiber?
Begin by pressing the reset button. While holding button down, power the unit on. Wait 8 seconds then release the button (if you want to reset the unit to factory defaults, wait at least 15 seconds). Signal LEDs will be lit indicating that the device is ready for recovery.
How do you align airFiber 5X?
Open up the alignment tool in the AirOS WebUI and have one installer slowly adjust the azimuth on one antenna until you see the signal get better, then worse again. Once you are losing signal, start backing up the azimuth until you reach the peak signal.
How do I know if Im using 5G?
If you don’t see 5G in the status bar Go to Settings > Cellular > Cellular Data Options. If you see this screen, your device has 5G activated. If you don’t see this screen, contact your carrier to confirm that your plan supports 5G.
https://www.youtube.com/c/AF5Gaming