How to reset the air bag on a 2005 Chevy Silverado?
Select the “codes” menu, then select “clear all codes.”. Unplug the scan tool from the vehicle. Start up the engine and check to make sure that the air bag light is no longer on. The air bag system is now reset.
How can I tell if my airbag sensor is working?
To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.
Why does my GM airbag light come on?
The bulletin address a problem with the electrical connectors for the airbag system that causes an Airbag Light on or Service Airbag Message to appear. GM will replace the worn/defective connector parts for free as long as your vehicle VIN number is covered by the bulletin (see below for compatibility)
Why is the airbag light on when the seat is vacant?
If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.
Why are my air bags not working on my 2005 Chevy Silverado?
The contact owns a 2005 Chevrolet Silverado. The contact stated that the air bag light illuminated on the instrument panel. The contact took the vehicle to the dealer and was told that the wiring for the air bag sensor under the passenger seat was failing. The VIN was available. The failure mileage was unknown and the current mileage was 50,000.
Where is the airbag code on a 1996 Chevy?
If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.
How does the airbag scanner work on a Chevy?
Plug your Chevrolet Airbag Scan Tool into the 16 pin OBD2 port. The port is trapezoid in shape and allows the scanner to plug only in one direction. Turn on the ignition. Do not start the engine. If your Chevrolet has a START/STOP button, press this button without pressing the brake pedal. Allow your Chevrolet airbag scanner to power on.
Where do I find the service airbag message?
The service airbag message is something that can appear on the DIC of your vehicle, which stands for driver information center.
How to fix the service airbag light on a GMC Sierra?
To fix this error – you need to disconnect both batteries, drop the skid plate, and replace the Front Impact sensor. The sensor was $65 on Amazon. Thanks everyone for all of your support! Send me stuff! The Tools I Use: https://www.amazon.com/shop/bonecrrus… Loading…
Is there an air bag sensor on my GMC wt?
Dealer ordered the sensor and will install it on Monday. Had it happen on my 2007 GMC WT. I asked for the old parts and the area where the bolt goes through the sensors were loaded with corrosion, which made me wonder whether the sensors were just losing ground.
Select the “codes” menu, then select “clear all codes.”. Unplug the scan tool from the vehicle. Start up the engine and check to make sure that the air bag light is no longer on. The air bag system is now reset.
To fix this error – you need to disconnect both batteries, drop the skid plate, and replace the Front Impact sensor. The sensor was $65 on Amazon. Thanks everyone for all of your support! Send me stuff! The Tools I Use: https://www.amazon.com/shop/bonecrrus… Loading…
Dealer ordered the sensor and will install it on Monday. Had it happen on my 2007 GMC WT. I asked for the old parts and the area where the bolt goes through the sensors were loaded with corrosion, which made me wonder whether the sensors were just losing ground.
Where are the air bag connectors on a GMC Acadia?
The airbag connectors on some 2008 Buick Enclave, GMC Acadia, and Saturn OUTLOOK vehicles, and 2010 Chevrolet Malibu and Pontiac G6 vehicles may wear, leading to corrosion in the connector terminal pins at the connection between the body main wiring harness and the front driver and passenger side impact air bag.