What does a Turbo 350 transmission pan look like?
Look at the transmission pan. The Turbo 350 has a basically square pan with one corner cut off. The part of the pan at the rear of the transmission looks like the lower part of the state of Texas (really). It measures 16 5/8-inches long and 13-inches wide.
Is a TH350 aluminum?
TH350, 2.25″ Depth, Aluminum, Polished, Gasket(s) Included, Hardware Included, Drain Plug.
How many quarts of transmission fluid does a TH350 take?
The pan holds 2.5 to 3 quarts only. Don’t run it too long with very little fluid in it or out it comes again.
How strong is a Turbo 350?
The Stage 1 TH350 is rated up to 450 hp. Those seeking something a little stronger can check out the Stage 2 version (PN PA35102) that holds 550 hp and retails for $1,500 with a real world street price of $1,175 from most vendors.
How do I know if I have TH350 or th350c?
Look for the vacuum modulator. It will be on the side of the transmission and have a rubber vacuum line attached to it. If this fitting is on the right front of the transmission, you have a TH350. On the similar TH400 it is attached at the right rear of the transmission.
What is the difference between a 700R4 and a Turbo 350?
The 700R4 has an overdrive while the TH350 does not. Overdrives allow for high-speed cruising, which saves fuel while lowering torque.
How do I know what Chevy transmission I have?
Chevrolet transmissions can be manual or automatic. Automatic transmission on a Chevy can be identified in one of two ways: You can look at the size of the pan on the transmission or you can search for the identification number that has been stamped somewhere on the casing.
What’s the difference between Turbo 350 and 400?
They are completely different transmissions. The Turbo 400 is larger, longer, and heavier than the Turbo 350 and was designed to live behind higher-torque applications such as big-blocks. If you’re worried about the ultimate strength of the transmission, consult one of the transmission specialists for upgrades.
How many quarts does a Turbo 350 transmission take?
The TH350 takes about 4 quarts in the pan, and then requires additional based on the torque converter being used. When combined with a 9.5” converter, the overall requirement is around 10 quarts. The Turbo 350 transmission, commonly known as the TH350, was a 3 speed automatic transmission that began phasing out the GM Powerglide in 1969.
What are the specs for a Turbo 350?
Turbo 350 Performance Specs. The most torque from an engine that this transmission was applied to was 410 lb-ft. This is an automatic transmission that is longitudinally mounted, making it applicable for rear-wheel drive cars. This transmission is a 3 speed, and no overdrive gear was available.
What kind of transmission does a GM TH350 have?
This transmission replaced the GM Powerglide automatic transmission, which was a 2 speed automatic transmission that was in production for 23 years. The Turbo 350, known by the name TH350, was used in nearly all GM rear wheel drive car and truck applications during its tenure.
How many quarts of oil does a TH350 take?
The TH350 takes about 4 quarts in the pan, and then requires additional based on the torque converter being used. When combined with a 9.5” converter, the overall requirement is around 10 quarts.