Where do I run the ON OFF switch for fog lights?
If you’re adding fog lights to a vehicle not originally equipped with them, you’ll need to start by running the wiring for an on-off switch from under the hood to the inside of the vehicle. The easiest and most direct way to do so is to run the wire through the vehicle’s firewall.
Where is the relay wire for a fog light?
Connect one BLACK lead to the vehicle ground and to the relay terminal labeled 86. Connect the YELLOW wire to the yellow switch wire terminal and to the relay terminal labeled 85. Test the operation of the lamps as follows: Re-connect the battery.
How do you connect a lumen fog light?
Connect (white) power wires together with the matching (white) power wires from each light. After that, connect them to the Y-shaped (white) power wire thats had the other end of it run inside the vehicle.
What kind of fog lights do I Need?
Bumper mount lights fit in specifically designed holes and are usually round or rectangular. This style is the way that most fog lights come from the factory. If you’re replacing your stock fog lights, this is where to start. Grill Mount. Larger, usually round.
Connect one BLACK lead to the vehicle ground and to the relay terminal labeled 86. Connect the YELLOW wire to the yellow switch wire terminal and to the relay terminal labeled 85. Test the operation of the lamps as follows: Re-connect the battery.
What’s the best way to Mount fog lights?
Choose the style of lights. There are a large variety of fog light styles available, but they all break down into three mounting categories. Decide which style fits your vehicle best. Bumper Mount. Bumper mount lights fit in specifically designed holes and are usually round or rectangular.
How to wire fog and driving lights harness?
Connect the end of the circuit tester to ground (-) and use the tester to locate the headlamp low beam lead. Turn off the ignition and the headlamps. Disconnect the battery. For Driving Lights: Turn on the high beam headlamps. Connect the end of the circuit tester to ground (-) and use the tester to locate the headlamp high beam lead.
What are the restrictions on installing fog lights?
Check your local laws. Some areas have restrictions on the type and color of lights you can install. Check your local regulations to make sure that your new lights are in compliance. Not all fog lights are approved for road use by the Department of Transportation.