How do I turn off the maintenance required light on my Toyota Avalon?

How do I turn off the maintenance required light on my Toyota Avalon?

To reset the maintenance light on a toyota avalon, put your ignition key to the ‘acc’ or ‘lock’ position. Push and hold the trip meter reset nob. While holding the trip meter reset nob, turn the ignition to ‘on’, but do not start the car. Hold the meter reset until the maint reqd light switches off.

When does the maint REQ’D light go out?

When the mileage driven reaches between 8,000 to 10,000 miles, the MAINT REQ’D light will illuminate for 2 seconds and then blink on and off for 10 seconds then it’ll go out. When the mileage driven exceeds 10,000 miles the MAINT REQ’D light will illuminate and stay on as long as the ignition switch is in the ON position.

How to reset maintenance required light ( 2001-2005 )?

If the lights are on, the MAINT REQ’D light will not reset. If your Civic is equipped with daytime running lights (DRL), the DRL must be disabled so the MAINT REQ’D light can be reset. These are the steps: Turn the ignition switch to the OFF position.

When does the Honda Civic maint REQ’D light go off?

After 10 seconds, the MAINT REQ’D light will reset and turn off. The MAINT REQ’D light is designed to illuminate (whenever the engine is running) after 10, 000 miles. After the MAINT REQ’D light is reset, it will illuminate when the ignition switch is turned on then will go out after 2 seconds.

How to reset the ” maint reqd ” light-Toyota?

Release the odometer button/knob . Turn key to OFF position . That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Is High Octane Gas Worth the Money?

How do you reset the maint REQ light?

These are the steps: Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine). Hold the SELECT/RESET button for about 10 seconds. After 10 seconds, the MAINT REQ’D light will reset and turn off.

When the mileage driven reaches between 8,000 to 10,000 miles, the MAINT REQ’D light will illuminate for 2 seconds and then blink on and off for 10 seconds then it’ll go out. When the mileage driven exceeds 10,000 miles the MAINT REQ’D light will illuminate and stay on as long as the ignition switch is in the ON position.

After 10 seconds, the MAINT REQ’D light will reset and turn off. The MAINT REQ’D light is designed to illuminate (whenever the engine is running) after 10, 000 miles. After the MAINT REQ’D light is reset, it will illuminate when the ignition switch is turned on then will go out after 2 seconds.

How to reset maintenance required warning light in Toyota Tacoma?

Don’t Start The Engine. Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “MAINT REQD” flashes multiple times and the light goes off. Turn The Ignition OFF. Maintenance Reset Is Complete.