How do you change the thermostat on an Acura Integra?
In an Acura Integra, it may be necessary to remove the top of the intake manifold to better access these bolts. Take out the old thermostat. Take note of the position of the thermostat. Seat the new thermostat and gasket in the housing in the exact same position as the old one.
Where to drain coolant from Acura Integra engine block?
Locate a plastic drain plug through that opening. Loosen the plug to drain the coolant from the radiator and hoses into an appropriate container. If the coolant is relatively new and clean, reuse it later. Follow the upper radiator hose from the radiator to the engine block if your Acura Integra was produced between 1986 and 1994.
Where is the radiator hose on an Acura Integra?
Follow the upper radiator hose from the radiator to the engine block if your Acura Integra was produced between 1986 and 1994. For models built between 1994 and 2001, follow the lower radiator hose. Locate the thermostat housing at the point where the radiator hose meets the engine block.
How do you remove an Acura Integra intake manifold?
Remove the clamp from that end of the hose and pull the hose off. Unbolt the two 10mm bolts on either side of the thermostat housing and remove the housing cover. In an Acura Integra, it may be necessary to remove the top of the intake manifold to better access these bolts.
How do you remove the thermostat from a 1994 Honda Accord?
For models built between 1994 and 2001, follow the lower radiator hose. Locate the thermostat housing at the point where the radiator hose meets the engine block. Remove the clamp from that end of the hose and pull the hose off. Unbolt the two 10mm bolts on either side of the thermostat housing and remove the housing cover.
In an Acura Integra, it may be necessary to remove the top of the intake manifold to better access these bolts. Take out the old thermostat. Take note of the position of the thermostat. Seat the new thermostat and gasket in the housing in the exact same position as the old one.
Follow the upper radiator hose from the radiator to the engine block if your Acura Integra was produced between 1986 and 1994. For models built between 1994 and 2001, follow the lower radiator hose. Locate the thermostat housing at the point where the radiator hose meets the engine block.
Locate a plastic drain plug through that opening. Loosen the plug to drain the coolant from the radiator and hoses into an appropriate container. If the coolant is relatively new and clean, reuse it later. Follow the upper radiator hose from the radiator to the engine block if your Acura Integra was produced between 1986 and 1994.
Remove the clamp from that end of the hose and pull the hose off. Unbolt the two 10mm bolts on either side of the thermostat housing and remove the housing cover. In an Acura Integra, it may be necessary to remove the top of the intake manifold to better access these bolts.