Is there anyone here that has replaced their VY radio mast and rope?

Is there anyone here that has replaced their ‘Mast & Rope’ Antenna on the same VY as mine that can confirm, or deny, the correct AERPRO part number please? Thanking everyone in advance. Click to expand… Thanks. Came across these during my weekend of research, however I’m after the correct AERPRO part number. Appreciate your time. Thanks.

How to fix problems with your TV antenna?

10 Common TV Antenna Reception Problems and How to Fix Them. 1 1. The Antenna Cable’s Deteriorated. 2 2. Broken Fly Leads. 3 3. Problems with the Antenna Outlet. 4 4. The Antenna Needs an Upgrade. 5 5. The Antenna Is Facing the Wrong Way.

Can a broken cable lead to an antenna?

The cable leading to the antenna might’ve broken down. This can occur both inside and outside your home, so make sure you check the full length of the cable. The cabling outside is, of course, the most susceptible to degradation. 2. Broken Fly Leads

How to remove a 1993 to 1996 power antenna mast?

Figure 1: This illustration shows the special nut and grommet positioning for the 1993 to 1996 Power Antenna Mast setup. It also shows which direction to turn the special nut to remove it. Once the nut and grommet are removed, turn the radio on.

How do you remove an antenna mast on a corvette?

Cut the largest mast tube 1 inch from the top of the longest section of the mast. Next, fill the hollow mast tube with a drill bit (or a solid metal cylinder) to prevent the tube from collapsing when applying a vise grip. Apply the vice grip to the section of tube filled with the drill bit (or solid metal cylinder).

Can you replace the antenna on an aerpro?

Next purchase was for the full replacement motor and antenna, Aerpro AP971. The factory bracket doesn’t fit the Aerpro motor assembly so you have to use then one they supply. Wasn’t hard to install, some filing of the bracket to make it fit on the new motor nice and snug.

Navigation