Where is the bolt on a self adjusting pulley?
The self-adjusting pulley is spring-loaded and provides its own tension. The other requires adjustment with a bolt that is located on the side, top or bottom of the pulley. Only the latter type of tensioner pulley may be altered.
How to tighten the belt on a tensioner pulley?
Loosen the bolt head in the center of the tensioner pulley with a ratchet and a socket by turning it counterclockwise. Tighten the tensioner pulley by turning the adjustment bolt clockwise with the ratchet and socket until the belt is tight.
What kind of pulley does an engine use?
There are two types of tensioner pulleys that provide the tension on an engine’s accessory belt or belts. One type is self-adjusting; the other requires manual adjustment. The self-adjusting pulley is spring-loaded and provides its own tension.
When do I get my spring loaded bolt?
Used for securing gates and doors, size relates to overall length. 12mm shoot. Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery.
How does a spring loaded tensioner pulley work?
The tensioner pulley is on the end of a spring-loaded tensioner. The accessory drive belt rides on the pulley while the spring-loaded portion of the assembly puts tension on the accessory drive belt to keep it tight enough so that it doesn’t slip on the rest of the pulleys.
How do you remove a bolt from a tensioner pulley?
The tensioner pulley has a smooth surface that the top of the belt — the side with no grooves — rides on. Put a socket on the bolt and turn the bolt counterclockwise to break it loose.
Why is my pulley bolt not coming out?
Though this particular bolt doesn’t usually seem to have problems, sometimes it can rust or have some other issue, causing the bolt to not come out easily. If this is the case, spray it with lubricant and allow it to set for a few minutes to give the lubricant time to work down the threads of the bolt.
How do you replace an extension spring pulley?
Place the nut on the bolt, and finger tighten the nut. 27. Secure the pulley to the pulley fork by tightening the nut and the bolt. 28. You are now ready to attach the cable clip to the S-hook. Pull the cable that goes on the pulley attached to the extension spring. You may need to lift the spring to raise it above the track where it normally sits.