Which command is used to configure a default route?

Which command is used to configure a default route?

To view the default route configuration, use the “show ip route” command from the privileged-exec mode. You can also use the “show running-config” command to view the command that was used to configure the default route.

How do I change the default route in CMD?

Workaround 1: Manually add the default route for the Interface

1. Click Start, click Run, type cmd in the Open box, and then click OK.
2. Type route print, and then press ENTER to view the routing table.
3. Type the following command, and then press ENTER route add 0.0.0.0 mask 0.0.0.0 gateway IP metric 30 if Interface number.

How do you set a default route?

Perform these steps to configure a default route.

1. Enter global configuration mode. device# configure terminal.
2. Enter 0.0. 0.0 0.0.
3. (Optional) Enable the default network route for static route next-hop resolution.
4. (Optional) Configure next-hop recursive lookup to resolve the next-hop gateway.

What is the command to configure a default gateway on switch?

ip default-gateway command
To configure the default gateway for the switch, use the ip default-gateway command. Enter the IP address of the default gateway. The default gateway is the IP address of the router interface to which the switch is connected. Use the copy running-config startup-config command to back up your configuration.

How do I set default routing?

Perform these steps to configure a default route.

1. Enter global configuration mode. device# configure terminal.
2. Enter 0.0. 0.0 0.0.
3. (Optional) Enable the default network route for static route next-hop resolution.
4. (Optional) Configure next-hop recursive lookup to resolve the next-hop gateway.

How do I change a persistent route in Windows?

Add or remove persistent (static) routes in Microsoft Windows.

1. To remove or to delete an entry, type this: “route -p delete 10.11.12.13”
2. HKEY_LOCAL_MACHINE->SYSTEM->CurrentControlSet->
3. ->Services->Tcpip->Parameters->PersistentRoutes.

How do I find my default route?

How to Find Default Gateway IP Address on Android?

1. Tap Settings.
2. Tap Wi-Fi.
3. Long tap your network connection.
4. Tap Modify network.
5. Tap Advanced options.
6. Switch the IPv4 settings to Static.
7. Find your gateway IP address listed next to Gateway.

What is IP default network command?

The ip default-network command is another way of indicating a default route. By issuing the command ip default-network 198.15.15.0 for example, what you are telling the router is “if you have a route to this destination, then the next hop IP address to get to this destination should become a candidate default route”.

How do I find the default route?

Which command is used to configure an IPv6 static default route?

::/0
IPv6 also has a default static route similar to the IPv4 quad zero (0.0. 0.0) static default route. Instead, the IPv6 command uses the ::/0 notation to specify all networks. For example, a default static route as specified by the “::/0” entry is configured on router R2 to reach all other networks connected to R1.

What is a static default route?

A static default route is used to send everything that you don’t have a destination for in the routing table (depending on ip classless of course). For instance when you connect to the internet from home, your router doesn’t have a destination network for every site on the internet.

What is an IP route command?

IP route command and parameters explained ip route. This is the base command which adds new route in routing table. destination_network_# [subnet_mask] This is the first parameter. It specifies the destination network address. IP_address_of_next_hop_neighbor / interface_to_exit. This parameter provides a way to reach the destination network. administrative_distance. permanent.

What is the default gateway in Cisco?

Cisco CCNA – Default Gateway & Default Routes. Default route which is also known as the gateway of last resort, is used in forwarding packets whose destination address does not match any route in the routing table. In IPv4 the CIDR notation for a default route is 0.0.0.0/0 and ::/0 in IPv6.

What is a static IP route?

A static IP route specifies the route’s destination address and the next-hop router’s IP address or routing switch interface through which the routing switch can reach the destination. (The route is added to the routing switch’s IP route table.)