How do you check the codes on a Cadillac STS?

How do you check the codes on a Cadillac STS?

How to Check Car Codes in Cadillac Cars

  1. Put the key into the ignition and turn it to the “on” position.
  2. Locate the Driver’s Information Center labeled on the control panel.
  3. Let go of the buttons when you see text appear on the Driver’s Information Center.

What do trouble codes mean on a Cadillac?

By pressing a set key sequence on the dash, the Cadillac will display any trouble codes, warnings, or watch conditions being monitored by any of the various control systems. These trouble codes are called Diagnostic Trouble Codes (DTC), and are shown by system.

Where is the ignition switch on a 99 DeVille?

On the cars up to 1995, on the Climate Control panel, press the OFF and WARM buttons simultaneously. On the 96/97, push the OFF button and the top (warmer) end of the PASS rocker switch. For 99 Deville, Turn the ignition switch to ON. Simultaneously press the following buttons until all VF display segments (IPC and CCP) are illuminated:

What does no X code mean on 2003 CTS?

If no codes are present for a system, a NO X CODE or NO X DATA message will be displayed. NO X DATA — Communication lines are not operating (X represents the system) For the 2003 CTS Non-Nav, turn on the ignition without starting the car. Push in the F1 and the F6 function keys on the radio at the same time.

Where is the SDM located on a Seville?

SDM (Sensing and Diagnostic Module) Includes airbag crash data. Under RF seat of Seville. 1. Turn the ignition switch ON. [Bruce notes: interestingly, the engine can be on or off] 2. On the cars up to 1995, on the Climate Control panel, press the OFF and WARM buttons simultaneously.

On the cars up to 1995, on the Climate Control panel, press the OFF and WARM buttons simultaneously. On the 96/97, push the OFF button and the top (warmer) end of the PASS rocker switch. For 99 Deville, Turn the ignition switch to ON. Simultaneously press the following buttons until all VF display segments (IPC and CCP) are illuminated:

By pressing a set key sequence on the dash, the Cadillac will display any trouble codes, warnings, or watch conditions being monitored by any of the various control systems. These trouble codes are called Diagnostic Trouble Codes (DTC), and are shown by system.

Is the Cadillac DeVille a registered trademark in the US?

2002 Cadillac DeVille Owner’s Manual Litho in U.S.A. Copyright General Motors Corporation 06/08/01 Part Number 25729638 A First Edition All Rights Reserved ii GENERAL MOTORS, GM and the GM Emblem, CADILLAC, the CADILLAC Crest & Wreath and the name DEVILLE are registered trademarks of General Motors Corporation.

If no codes are present for a system, a NO X CODE or NO X DATA message will be displayed. NO X DATA — Communication lines are not operating (X represents the system) For the 2003 CTS Non-Nav, turn on the ignition without starting the car. Push in the F1 and the F6 function keys on the radio at the same time.