Does a Shimano chain have a direction?
One of the most common questions about replacing a bicycle chain is, are bicycle chains directional? Some bicycle chains are directional. SRAM chains are not directional; however, Shimano chains are (the engravings on the chain must be facing away from the bike).
Why are Shimano chains directional?
The directional chains are designed so that the outer plates are optimised for chain ring shifts, and the inner plates are optimised for cassette shifts, so the difference between a directional and non directional chain is the different designs of the inner and outer plates.
Does it matter which way round a chain goes?
Chain direction matters if the chain is worn. If you remove and soak your chain regularly (which, by the way, is not recommended, regardless of how easy it is to remove the chain), then you won’t have a problem regardless of orientation of chain.
Do bike chains have a direction?
Chain Routing Some chains are directional and any logos or printed letters should face out towards the mechanic on the drive side. The process for routing the chain is the same for either master link or connecting rivet chains, just make sure to lead with outer plates if using a connecting rivet chain.
Which side of chain faces out?
Is the derailleur the same as the bike chain?
There are two types of the derailleur, the front derailleur and back derailleur, or rear derailleur. However, the most related one to the bike chain is the rear derailleur. The bike chain and derailleur are designed as corresponding parallel parts; the arms of the derailleur will be screwed in the frame and control the chain.
How do you thread a chain on a rear derailleur?
Pass the chain up around the front of the top jockey wheel on the rear derailleur. Pass the chain up around the back of the smallest cog on the back wheel. Engage the chain on the smallest cog on the back wheel and pull it through. Pass the chain through the front derailleur cage and engage it on the small cog at…
Where does the chain go on a bike?
The chains are the parts that link the gears in the head and end of the bikes, more specifically, the two derailleurs. Thanks to the chains, the power is transferred from the pedals to the derailleur and moves the bike. The bike chain moves in horizontal in front derailleurs and goes vertically and horizontally in the back derailleur.
What to do if your rear derailleur is not straight?
TECH TIPS •The rear derailleur will not gear shift properly if the derailleur hanger is not straight. Use TL-RD11 to check whether the derailleur hanger is straight or not. 1. Set the switch lever in the OFF position. ON Switch lever OFF 8 INSTALLATION/REMOVAL Installing the rear derailleur 2. Tighten the rear derailleur fixing bolt.