What do you need to remove a crankshaft pulley?
Remove the radiator condenser tank assembly mounting bolt, and move the radiator condenser tank assembly to a place where it does not interfere with the drive belt removal and installation. <<B>> DRIVE BELT REMOVAL Since the serpentine drive system with the auto-tensioner is used, the following operations will be required. 1. caution
How do you remove a drive belt pulley on a John Deere?
Fit the proper-sized socket onto the bolt that holds the drive belt pulley to the base of the engine’s crankshaft. Hold the pipe wrench with one hand, and with your other hand unscrew the bolt using the socket wrench.
How do you unbolt a crank pulley bolt?
Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque. If you have one handy, try it out. If it doesn’t work, then use a crank bolt removal tool. If the impact gun didn’t work, the next step is to use the crank bolt removal tool.
Can you remove the pulley on a Honda Civic?
With the bolt removed, you should be able to just pull off the crankshaft pulley. If your Civic has the drive belt still attached, you’ll need to remove it before pulling off the crankshaft pulley. You’ll need to loosen the alternator retaining bolt in order to relieve tension on the belt.
What are the best tips for crankshaft pulley removal?
How To – Trick To Getting Your Engine Crank Pulley Off Try Tightening it. First try tightening the nut to see if you can break the mechanical weld that has formed in the threads. Heat. Special Tools. Your final way off. Final Note. The YouRepair Store sells a full line of Mechanics Tools including special tools used for removing crank pulley bolts and other tough items.
What causes a crank shaft pulley to wobble?
What causes the crank pulley to wobble. A bad harmonic damper on the pulley would result in it wobbling and only solution is to replace the pulley, which should be done asap as failure of the pulley can result in the drive belts getting entangled and if the belts were to get to thr timing belt, it can damage the engine.
What is the function of crank pulley?
A crankshaft pulley powers components on the crankshaft. Crankshafts are responsible for driving the car wheels. Crankshaft pulleys transmit mechanical power and torque, or the force of motion, through the pulley system to additional car elements, such as the power steering pump and alternator.
What is a crank pulley?
In many cases, the term crankshaft pulley is used to describe the pulley that comes with the vehicle, while crank pulley refers to a component that is installed as an aftermarket upgrade, though the terms are interchangeable. This pulley transfers energy to the air conditioning, stereo, and alternator, among other components.