Why is my radio not working in my Mercedes?
If it isn’t just the radio that isn’t turning on the culprit may be a dead battery. However, if your car turns on but there isn’t any sound coming from the radio, it could also be: Bad speaker wires. Blown fuse.
How do I reset my radio after battery?
Syncing the Radio
- Turn the ignition key to the “On” position, but don’t start the engine.
- Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
How do I unlock my Mercedes radio without the code?
Using your VIN is one way to obtain your Mercedes-Benz radio code. To do so, you will need to find the VIN, then contact an authorized Mercedes-Benz dealership or the Mercedes-Benz Customer Assistance Center with it and proof of ownership. You will then be given your Mercedes-Benz radio code.
How do I reset my car radio after the battery dies?
The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.
Why is my radio not powering on?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. If the radio itself will not turn on, chances are good that there’s one or more blown fuses causing the problem. A damaged antenna means that your radio isn’t able to receive signal from stations.
Why is the radio not working on my Mercedes Benz?
Is the radio on your Mercedes-Benz not working? Some common problems with the Mercedes-Benz COMAND system include issues such as: Radio panel doesn’t turn on. (Hint: Check fuses.) The fist thing you should try is to do a soft reset of the COMAND unit.
What causes a Mercedes Benz to have no sound?
Some common problems with the Mercedes-Benz COMAND system include issues such as: 1 Head Unit / Radio stuck on Mercedes-Benz logo 2 Turns on and then off 3 Shuts off randomly 4 COMMAND will freeze 5 Radio powers on but there is no sound 6 Audio Gateway (AGW) drains the car battery 7 Radio panel doesn’t turn on. (Hint: Check fuses.)
How to reset the COMAND / nav radio system?
How to perform a soft reset of the COMAND / NAV Radio System. Find the fuse box under the dashboard. Pry the side cover, look for fuse 26 and 28 and remove both fuses. The second fuse box may be on the left side of the trunk. Locate and remove fuse 6.
What to do if your Mercedes Benz audio gateway is defective?
The Audio Gateway is the brains of the Mercedes-Benz COMAND system. You will need to have an authorized Mercedes-Benz service technician replace the whole unit if AGW is defective. This entry was posted in Info Articles.