How can I check my Honda Civic water pump?
The technician will check for leaks around the water pump area. While the engine runs, a stethoscope may also be used to check for noise from the water pump bearing. If it’s not buried away, the belt driving the pump, as well as its pulley, will be visually inspected.
How much does it cost to replace a Honda water pump?
Know what price you should pay to get your vehicle fixed. The average cost for a Honda Civic water pump replacement is between $326 and $461. Labor costs are estimated between $223 and $283 while parts are priced between $103 and $178.
How do you drain a radiator with a water pump?
Figure 3. Radiator being drained. To access the timing belt cover and related components, the cover needs to come off. There should be four 10mm bolts and one 12mm bolt. Then, you will need to remove the timing cover. Using the socket wrench, remove bolts. Then, you will need to remove the timing cover to access the belt and water pump.
Where is the timing belt on a water pump?
The water pump is driven by an accessory belt at the front of the engine, or by the timing belt or timing chain. As the engine runs, this belt turns and keeps the pump working. What are the symptoms related to a bad water pump?
How do you replace the water pump on a Honda Civic?
Because the water pump will be replaced, it’s important to clear the system of the old coolant. Open the coolant cap on top of the radiator. Turn the petcock at the bottom of the radiator to drain the coolant into drain pan. Squeeze the rubber radiator hoses to remove any excess fluid that may be trapped.
What kind of maintenance does a Honda Civic need?
This article applies to the Honda Civic/Del Sol (1992-2000). There are many components to a vehicle’s motor that requires service and maintenance. Timing belts and water pumps are two very crucial components. One works indirectly with the other, and both independently control important functions of your engine.
How to remove timing belt and water pump?
To access the timing belt cover and related components, the cover needs to come off. There should be four 10mm bolts and one 12mm bolt. Then, you will need to remove the timing cover. Using the socket wrench, remove bolts. Then, you will need to remove the timing cover to access the belt and water pump. Figure 4. Valve cover removal diagram.
Figure 3. Radiator being drained. To access the timing belt cover and related components, the cover needs to come off. There should be four 10mm bolts and one 12mm bolt. Then, you will need to remove the timing cover. Using the socket wrench, remove bolts. Then, you will need to remove the timing cover to access the belt and water pump.