How do you reset the service light on a Fiat 500?

How do you reset the service light on a Fiat 500?

500C Models

  1. Turn the ignition to ON. Do not start the engine.
  2. Slowly press the accelerator pedal all the way down three times within 10 seconds.
  3. Turn the ignition to the OFF position.
  4. Now start the engine and the oil maintenance light will be reset.

How often should Fiat 500 be serviced?

What are the service intervals for a Fiat 500? For newer models Fiat recommends that you should service your Fiat 500 every year or 9,000 miles for petrol models and every 12,000 miles for diesel models. Earlier models before 2015 required servicing every two years or 18,000 miles.

Why is my oil change light still on?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. The next common cause is low oil pressure.

What does service expired mean Fiat 500?

It simply means that your car is due for servicing, or it means that the FASS did not reset your service interval when you got the car serviced.

How often do you change spark plugs on a Fiat 500?

They include items like spark plugs, which should be changed every 30,000 miles, and the in-cabin air filter, which should be replaced every 20,000.

How many miles can a Fiat 500 last?

The Fiat 500 is a small, durable car that can last on average between 200,000 – 250,000 miles when properly maintained and driven conservatively. Based on an annual mileage of 15,000 miles, you can expect 13 – 17 years of service before it breaks down or requires expensive repairs.

Can I drive with service light on?

Is it safe to drive when the service required warning light is on? While your car’s drivability shouldn’t be affected, driving for extended periods with the light on will cause excess wear and tear on the engine. Especially with oil, not changing it at regular intervals will severely shorten your engine’s lifespan.

What does it mean when your service light comes on?

The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is. Your local mechanic can usually diagnose the problem for about $75.

What does it mean when the service engine light is on?

The service engine soon light means just what it says – that you should have your engine serviced soon. Since the sensors that turn on the service engine soon light are often triggered by a malfunction in the emission control system, the problem could be as simple as a missing or ill-fitting gas cap.

How to reset service light on Fiat 500?

Service Light Reset FIAT 500 1 Turn the ignition to run (one position before starting engine). 2 Fully depress the accelerator pedal slowly three times within 10 seconds. 3 Turn the ignition off and then start the engine to verify the indicator has been reset.

What does it mean when the oil light flashes on Fiat 500?

If symbol lights constantly with an applicable message, this signifies oil pressure is low. Do not continue journey. Engine may be damaged, contact a Fiat technician. Alternatively the symbol may flash on the Fiat 500. This is to signify engine oil needs changing. Journey can be continued as normal, though have engine serviced soon.

What does the brake light mean on a Fiat 500?

Light should illuminate until engine has started. If light remains on, it signifies the parking / hand brake is on, or that their is insufficient brake fluid in the reservoir. If light illuminates and the handbrake is not applied, braking may become defective.

What does the exclamation mark mean on a Fiat 500?

Alternatively the symbol may flash on the Fiat 500. This is to signify engine oil needs changing. Journey can be continued as normal, though have engine serviced soon. Either the exclamation mark symbol or the ‘BRAKE’ dashboard symbol may be used on various models of the Fiat 500. Light should illuminate until engine has started.