Where is the air filter on a 2001 Honda Civic EX?
Free video that shows you where the engine filter is located on a 2001 Honda Civic EX 1.7L 4 Cyl. Coupe (2 Door) and how to change it. Replacing a dirty air filter on your 2001 Honda Civic EX 1.7L 4 Cyl. Coupe (2 Door) improves fuel economy! About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Honda
How often should you change the air filter on a Honda Civic?
If you drive in dusty or sandy conditions, you should change your filter more frequently. A dirty air filter will cause your Civic to lose 1 – 3 mpg, depending on your driving, you can save 70 – 100 gallons of gas per year simply by changing your filter regularly.
How do you replace a Honda air filter?
Push cabin filter completely into the slot. Close the evaporator lid, screw it together, and re-attach the wire harness. Bolt in the glove box frame. Clip and screw in the trim piece on the right side of glove box. Re-install 12-volt panel. Securely reattach the glove box. Screw in the knee bolster panel.
Where is the evaporator on a Honda Civic?
Located behind the glove box is the evaporator, which looks like a black plastic box. Use needle-nose pliers to pinch and undo the white clip attaching the wire harness to evaporator lid. With your Phillips screwdriver, remove the screw securing the metal bracket to the evaporator lid. Lastly, lift the lid up. Figure 4.
Free video that shows you where the engine filter is located on a 2001 Honda Civic EX 1.7L 4 Cyl. Coupe (2 Door) and how to change it. Replacing a dirty air filter on your 2001 Honda Civic EX 1.7L 4 Cyl. Coupe (2 Door) improves fuel economy! About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Honda
If you drive in dusty or sandy conditions, you should change your filter more frequently. A dirty air filter will cause your Civic to lose 1 – 3 mpg, depending on your driving, you can save 70 – 100 gallons of gas per year simply by changing your filter regularly.
Push cabin filter completely into the slot. Close the evaporator lid, screw it together, and re-attach the wire harness. Bolt in the glove box frame. Clip and screw in the trim piece on the right side of glove box. Re-install 12-volt panel. Securely reattach the glove box. Screw in the knee bolster panel.
Located behind the glove box is the evaporator, which looks like a black plastic box. Use needle-nose pliers to pinch and undo the white clip attaching the wire harness to evaporator lid. With your Phillips screwdriver, remove the screw securing the metal bracket to the evaporator lid. Lastly, lift the lid up. Figure 4.