Do you have to keep the factory stereo?
Given my background, they put me to work writing about some of the most complex electronic products Crutchfield sells: car amplifiers, digital signal processors, wiring, professional sound mixers, and PA systems. Sometimes, you just have to keep the factory stereo.
Can a car stereo be installed with a factory AMP?
This factory amp is designed to make cheap factory speakers sound better. But it doesn’t do you any favors when you replace the stereo or those stock speakers. Retaining the factory amp usually makes it easier to install a new stereo, and in some vehicles that’s your only option. But your new stereo’s sound is limited to what that amp can do.
Are there any tweeters in the BMW stereo system?
The six-speaker Stereo system has no tweeters and no amp. The speakers are powered by the head unit. The mesh tweeter grilles inboard of the side mirrors are missing. The signal from the head unit is heavily equalized, and the rear signal is high-pass filtered. Here is the front signal: The HiFi system has front tweeters and an amp.
What do you need to connect an amp to a factory radio?
You’ll need one for the amp’s input and the other for its output. These cables will act like a “T-harness” to connect your amp to the factory system. Behind the factory radio, you can access all of the speaker wires in one place.
Can a factory stereo unit be replaced after market?
They match the interior look and illumination.They are less likely to be stolen and maintain your car’s value. Your Factory Stereo system may have a separate CD changer and steering controls that will be useless if replaced with an after-market unit. if not listed contact us 6 months warranty 407-933-1065
How do you connect an amplifier to a factory stereo?
Run two of these cables from the dash to your new amplifier. You’ll need one for the amp’s input and the other for its output. These cables will act like a “T-harness” to connect your amp to the factory system. Behind the factory radio, you can access all of the speaker wires in one place.
Can a factory OEM radio hook up to an XM reciever?
The radio also has the capability to hook up a factory oem XM reciever. If your vehicle already has XM this will work with your XM (it will plug and play – no need to call xm to transfer subscription since this radio is unlocked). If you have any questions feel free to email us.
Can a steering wheel be connected to a stereo?
Two companies (PAC and Axxess) make adapters that allow you to connect your Ford steering wheel audio controls to a new car stereo. The F-150 uses a single wire to send commands to the factory radio, so you can install either adapter without much trouble.
How can I find out if my stereo fits my car?
Select your vehicle below and let Crutchfield’s vehicle database find the stereos, speakers, and other products that fit your specific model. Can’t find your exact vehicle? Checking fit…
Where did I build my car stereo system?
Working in a music store in Austin, Texas, I spent a few years manufacturing, installing, repairing, and operating sound systems. Our customers were recording studios, nightclubs, and touring bands. Eventually I moved back to Charlottesville, Virginia and opened a small demo recording studio.
Is it possible to replace the car stereo?
And if you want to replace the stereo, the dash designs of some vehicles make it difficult – or impossible – to do. And sometimes, especially in newer cars, like the 2013 Ford Focus shown above, the factory stereo is actually pretty cool. But there’s still plenty of room for improved sound.
What kind of stereo wire does a Honda Civic use?
All of this information is taken from a 2008 Honda Civic! From what i can tell though, all 06+ Civics follow this system. (1)The shielded wires have a heat-shrunk tube insulating the outside of the wire. The Color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.
What’s the best way to install a car stereo?
Whether you’re a first-time DIY-er or an experienced car audio pro, KitFinder takes the hassle and guesswork out of choosing and installing your new stereo and/or speakers. The installation parts required to install the stereo gear you’re interested in, plus the parts that let you retain certain advanced factory features.
And if you want to replace the stereo, the dash designs of some vehicles make it difficult – or impossible – to do. And sometimes, especially in newer cars, like the 2013 Ford Focus shown above, the factory stereo is actually pretty cool. But there’s still plenty of room for improved sound.
Given my background, they put me to work writing about some of the most complex electronic products Crutchfield sells: car amplifiers, digital signal processors, wiring, professional sound mixers, and PA systems. Sometimes, you just have to keep the factory stereo.
Why do I get no sound from my car stereo?
Today we answer a fairly common question about not getting any sound from a car stereo, even though it powers on. While we answer a specific viewer question Allyn’s trouble shooting tips should be followed by anyone experiencing this issue. A Digital Multimeter is your best friend when installing or troubleshooting your stereo system!
Can a subwoofer be added to a car stereo?
The VSS Powerstage module breathes new life into your vehicle’s factory system, automatically correcting for the limitations of the factory speakers, then adding plenty of power so the speakers can sound their best. Of course Kicker includes a subwoofer!
What happens if I replace the AMP on my car stereo?
A problem with many premium sound systems is that replacing the puny factory amp with a more powerful one will mean losing some of the vehicle’s audio functions and audible notifications.
Why is there no sound from the aftermarket stereo?
Power comes on and everything seems to work on the HU, but there is no sound. I searched around the web for anyone that might have the same problem but came up with only a few similar questions. the understanding i have is that the factory amplifier will conflict with the preamp built into the aftermarket stereo. but how do you bypass the preamp?
The VSS Powerstage module breathes new life into your vehicle’s factory system, automatically correcting for the limitations of the factory speakers, then adding plenty of power so the speakers can sound their best. Of course Kicker includes a subwoofer!
How can I improve my car stereo without replacing the radio?
Below, we’ll show you a few examples of how to improve on the OEM sound system without replacing the radio. actory stereo systems often leave a lot to be desired. For example, sometimes they’re programmed with equalization (EQ) curves that compensate for the system’s lack of power by reducing the level of the bass.
Can you keep the factory stereo in a 2013 Ford Focus?
And sometimes, especially in newer cars, like the 2013 Ford Focus shown above, the factory stereo is actually pretty cool. But there’s still plenty of room for improved sound. Luckily, this problem has some solutions that let you keep your factory stereo and get spectacular sound, customized for your specific vehicle.
Working in a music store in Austin, Texas, I spent a few years manufacturing, installing, repairing, and operating sound systems. Our customers were recording studios, nightclubs, and touring bands. Eventually I moved back to Charlottesville, Virginia and opened a small demo recording studio.
How to turn on the component hifi stereo system?
Unplug the power cord from the electrical wall outlet. Plug the power cord back into the electrical wall outlet. Press the power button to turn on the stereo system. Press and hold the FUNCTION button and the Volume – button at the same time for more than five seconds.
What makes a car stereo an OEM radio?
Factory car radios are original equipment manufacturer parts, otherwise known as OEM. Unlike aftermarket radios, factory car radios are typically designed to work in your car without modification. They are the stereos that were meant for your car. Some original equipment radios are used by the car to communicate messages and warning tones.
Are there any accessories that work with a factory stereo?
We also have accessories that work with factory stereos like iPod interfaces, Bluetooth hands-free phone kits, Sirius XM Satellite radio, HD, USB, Android integration devices, Auxiliary audio inputs and rear entertainment video DVD systems. We carry many factory original AV parts and offer repairs as well.
Where can I get a replacement car stereo?
If you need to get your vehicle’s audio system working again without losing any of the OEM features, choose a factory replacement stereo receiver at CARiD. We offer head units from the most trusted OEM manufacturers in the industry at the prices that won’t break your budget.
Is there a way to keep the factory radio?
If want to keep the factory radio while improving the sound quality you can install new amps, speakers, or a powered subwoofer. CARiD offers a wide variety of options for any type of upgrade that you want to perform on your vehicle’s stereo system. Want to hook up your smartphone or other device to your factory stereo?
How to reset the component Hi-Fi stereo system to?
The steps on how to reset the component Hi-Fi stereo system to factory settings vary depending on the model number of your stereo system. Select the appropriate steps below based on the model number of your stereo system. Unplug the power cord from the electrical wall outlet. Plug the power cord back into the electrical wall outlet.