How do I setup my tp-link outdoor Access Point?

How do I setup my tp-link outdoor Access Point?

1)Go to the QUICK SETUP page, select Access Point and click Next. 2)In the LAN Settings section, specify the LAN IP address and the Subnet Mask for the device. Then, click Next. 3)In the Wireless AP Settings section, specify the basic wireless parameters to create a wireless network.

Can a TP-Link extender be used as an Access Point?

The extender can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. The extender will reboot and switch to Access Point mode.

What does an outdoor CPE do?

CPE (short of Customer Premises Equipment) is telecommunication hardware located near the customer’s home or office. The Outdoor CPE device is an outdoor access point (AP) or router to provide a long-distance wireless network solution.

How do I setup a point to point connection?

Configure a Windows PC for a Point-to-Point Connection

1. Select the “Use the following IP address” option.
2. Type an IP address between 192.168. 0.2 and 192.168. 0.255 (for example, 192.168. 0.5). Do not use 192.168.
3. Type 255.255. 255.0 in the Subnet mask field.
4. Leave the Default gateway field blank.

Which is better access point or extender?

An access point has the power to increase the network coverage in its designated area by 100%. A range extender is less effective, offering only about a 50% network coverage increase. Range extenders are a more cost-efficient option for individuals.

How do I setup a wifi extender as an access point?

To install your extender as an access point:

1. Plug the extender into a power outlet and wait for the power LED.
2. Connect an Ethernet cable to the Ethernet port of the extender.
3. Use a Wi-Fi device (wireless computer, smart phone, or tablet) and connect to the NETGEAR_EXT wireless network (SSID).

What is the difference between CPE and access point?

Access Point (AP) Mode: Allows wireless equipment such as a Smart Phone or Laptop to be connected to a wired network. In this mode the CPE unit is typically connected to a router on a wired network. The CPE unit provides security features that allow only select wireless devices to connect to it.

How do I connect two wireless access points?

To extend your home network:

1. Connect two access points to the same network.
2. Make sure that there is only 1 DHCP server.
3. Use the same wireless network name (SSID) for both AP’s.
4. Use the same password and encryption settings for both AP’s.
5. Enjoy!

What is TP Link utility?

TP-LINK Wireless Client Utility is a utility that comes via the driver download or on the included CD. The application helps users complete the software installation and wireless network settings, including security configurations and wireless connection.

What is the range of outdoor wireless access point?

A typical wireless access point using 802.11b or 802.11g with a stock antenna might have a range of 32 m (120 ft) indoors and 95 m (300 ft) outdoors. IEEE 802.11n, however, can exceed that range by more than two times.”.

What is a TP Link wireless router?

TP-Link Wireless Router (WiFi) drivers are tiny programs that enable your Wireless Router (WiFi) hardware to communicate with your operating system software. Maintaining updated TP-Link Wireless Router (WiFi) software prevents crashes and maximizes hardware and system performance.

What is outdoor access point?

Outdoor Wireless Access Points. An access point is a device that provides access to a network in an environment where it wouldn’t otherwise be available. A wireless access point (WAP) does so wirelessly, and these devices are available in both indoor and outdoor configurations.