How to replace the clockspring on a Dodge Journey?

How to replace the clockspring on a Dodge Journey?

In this video we will show you how to replace the clockspring also know as the steering wheel module on Dodge Journey / Fiat Freemont. In Europe Fiat Freemont is actually Dodge Journey and that is why it should be the same procedure to replace the clockspring.

How does a clock spring work on a car?

Clock spring (clockspring) is a device that contains a wound-up wire (ribbon cable) inside and allows the airbag, horn, and steering wheel buttons to stay connected as the steering wheel is rotated as you turn the steering wheel left and right.

How do you find the center of the clock spring?

Find the center position of the clock spring. You can do this by turning the clock spring all the way to the left and stop as soon as you feel slight resistance. Then turn it all the way to the right and count the total turns. Let’s say you get 6 full turns.

How to replace clock spring 2008 Mercedes Benz ( W204 )?

Common issue on 2008 Mercedes Benz C350…multi-function steering wheel buttons and horn stop working because of worn wiring of Clock Spring on steering column. Aka multi-function combination switch. Dealers charge $500 – $1,000 to replace this part. You can get it online for $115 and DIY in about 30 minutes.

Can a broken clock spring be reinstalled?

Reinstall the clock spring in the same neutral position. If you were to spin the clock spring a rotation or two and then reinstall it, you may not have enough slack in the internal ribbon before the steering wheel hits full lock. In this case, you run the risk of stretching or breaking the internal wires and damaging a perfectly good clock spring.

How do you replace the clockspring on a Dodge Ram?

Undo the fasteners connecting the airbag at the back of the steering wheel. Pull the airbag out just far enough to disconnect the wires attached to the harness of the clockspring wires. Mark the clockspring to aid in replacement of the piece and remove the harness from the steering wheel.

Can you replace the clock spring on a BMW?

If you decide to replace the clock spring yourself, remember that the new units will need to be programmed using an advanced BMW scan tool. This may require a trip to a BMW workshop. Not to worry, you can still save yourself some money replacing the parts yourself, than having the programming performed.

Where does the clock spring go on a steering wheel?

One part of the outer assembly follows the steering wheel, and the other part attaches to the steering column. This device is sometimes referred to as a spiral cable, airbag clock spring, steering wheel clock spring, clock spring assembly, cable reel, or contact reel, depending on the vehicle and where you live.

Posted In Q&A